Tweet
Is anyone doing any aluminum brazing? I've got a killer brazing rod that will do just about anything. One rod is 900 degrees melting and 1100 degrees melting for the other. Flux cored and awesome!
-
Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio! -
What are you brazing with it? -
He must be selling it.
JeffComment
-
aluminum brazing rod
I use it for brazing condensers, evaporators, and for making hard lines for a/c system. I'm not selling it. I looked for a long time before I found anything that was any good. My relatives own Westair, which is a welding supply house in San Diego and Yuma. They don't carry it. It is flux cored and the aluminum doesn't have to be spotless. The company that sells it is in Arkansas, I think. It is called Doc's Blocks. That is also the name of the website. I did buy the torch that they sell, but it is for propane and I just use my O/A setup on my service truck.Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!Comment
-
In that case tell me more. I have a use for that brazing once in awhile.Comment
-
FABRICATION-CRÉATION K ZEN
MILLERMATIC 210
SPOOLMATE 3035
SYNCROWAVE 200
HYPERTHERM 360Comment
-
http://www.docsblocks.com/products.asp?cat=16Originally posted by ShieldArc View PostEd Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me BacchusComment
-
Lanceman
Your relatives wouldn't happen to be the old San diego welders supply would they?? They were my supplier of choice, Sorry to say that the Oceanside office and Escondido office had poor customer service after Westair took over. Haven't been back in five years so I hope things have changed.
KerryMiller Syncrowave 200 W/Radiator 1A & water cooled torch
Millermatic 252 on the wish list
Bridgeport Mill W/ 2 axis CNC control
South bend lathe 10LX40
K.O. Lee surface grinder 6X18
Over 20 years as a Machinist Toolmaker
A TWO CAR garage full of tools and a fridge full of beer
Auto shades are for rookies
www.KLStottlemyer.com
Comment
-
Westair/SD Welders Supply
It's the same company. They changed names when they went out of state. The owner, Andy Castiglione, sort of retired. His son, Steve, is running the show. Sorry about your bad experience. I might get a different service, since I have a family account. I usually deal with the El Cajon branch. I'll let them know about your problem.
Thanks,
Lance CastiglioneMillermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!Comment
-
Yeah I was wondering because they were the weld supplier for a few shops I worked for. I think the customer service deal is hiring idiots. it happens everywhere. Good to see the family still owns it though.
KerryMiller Syncrowave 200 W/Radiator 1A & water cooled torch
Millermatic 252 on the wish list
Bridgeport Mill W/ 2 axis CNC control
South bend lathe 10LX40
K.O. Lee surface grinder 6X18
Over 20 years as a Machinist Toolmaker
A TWO CAR garage full of tools and a fridge full of beer
Auto shades are for rookies
www.KLStottlemyer.com
Comment
-
I have dealt with Oceanside for the last 4 years and have a never had a bad experience. I bought my 180SD there. Good people!
Miller Maxstar 200 DX
RMLS-14 Momentary Hand Control
Miller Syncrowave 180 SD
Porter Cable 14" dry metal saw
Hitachi 4.5" grinder
http://mhayesdesign.comComment
Comment