Finally got the basic table done. For those who care about such things the top is 30" x 40" X 1/2", the base is 2"x 1/4" sq tubing, the legs & shelf bracing is 2" X 2" X 3/16" angle, the shelf is #9 3/4" flat, & the casters are HF 330# cast centers. The basic table is simple, nothing fancy although I plan on adding a fold down cutting grid, vice, and other stuff at some point.
Announcement
Collapse
No announcement yet.
Welding Table
Collapse
X
-
Welding Table
Regards, George
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine
Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice CutterTags: None
-
Thanks for the good wordsRegards, George
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine
Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice Cutter
Comment
-
I didn't want to anyone to feel left out.Regards, George
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine
Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice Cutter
Comment
-
Originally posted by Trap DoctorSundown,
In you last photo (table Top on ) it showed your bender. Who made it? Can you post some photos of it?
Thanks
JimRegards, George
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine
Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice Cutter
Comment
-
Originally posted by 911HandymanGeorge, you might want to cover your fishing reels. The UV rays from your welders will break down your fishing line. Don't want the big one to get away...Regards, George
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine
Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice Cutter
Comment
-
that explains why
Originally posted by 911HandymanGeorge, you might want to cover your fishing reels. The UV rays from your welders will break down your fishing line. Don't want the big one to get away...
FarrisGone But Never Forgotten!
Comment
-
Kudos on the table...
Sundown - clever design on the locking casters, where did you get that idea? From what it looks like, you keep them from rolling and swiveling with a single bolt that threads all the way down to the wheel, correct?
I've been trying to figure out a way to keep my table mobile but stable at the same time, something by way of retractable casters or something. But I like your idea.
Comment
Comment