Announcement

Collapse
No announcement yet.

Project Specific Thread: Welding tables

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • swyman
    replied
    One thing I seen that I thought was cool was a guy at work welded a piece of 2" angle to the side of the table. On the long side of the rectangle work table the angle was welded flush with the top and the "V" of the angle pointing down. It makes working with pipe very nice and easy! I want to add that to my current table.

    Leave a comment:


  • monte55
    replied
    More Pictures of Welding Table Minus Chicken

    The previous post would only allow 5 pictures so here is the last two.


    The first picture here is bender fork for straightening metal, etc


    The next one is- Memorial plaque for neighbor's pet.
    Attached Files

    Leave a comment:


  • monte55
    replied
    My Welding Table Minus Dead Chicken

    Here are some pictures of my main welding work table. It is 44 " x 97" x 5/8" thick, sitting on 3 x 3 x 3/8 angle frame being supported on 6-4 x 4 x 3/8 square tubing legs with a bottom shelf as you can see. It took a bobcat to bring this into my shop. My friend and I built this a few years ago. You could park your car on this table and it wouldn't budge. I will describe the pictures in order of their appearance.

    The 1st picture shows 1 x 2 C channel bolted to table for railing assembly

    2nd picture shows another view of same

    3rd picture - notice each leg has a receiver tube for a MIG torch

    4th picture - notice CNC Router machine in background that made the last picture I show here (for my neighbor who just lost a loved pet)

    5th picture - notice hardy hole (spelling might be wrong) for accessories such as shrinker/stretcher shown.

    6th picture- notice to the left of the shrinker/stretcher, the pair of 1 " round
    welding to underneath of table surface to bend/straighten metal pickets etc.

    7th picture- picture of Memorial Plaque for neighbor who lost pet made with CNC Machine in 4th picture.
    Attached Files

    Leave a comment:


  • TJsparks
    replied
    Can't build this one unless you own a foundry. They were going to take it to the scrap yard. Got it for free. TJ
    Attached Files

    Leave a comment:


  • Camaro Zach
    replied
    Pretty standard 4'x8'x1/2" top, 4" channel, 3x3x1/4" legs, and a pipe rack on the back consuming otherwise useless space.
    Attached Files

    Leave a comment:


  • terry welds
    replied
    terrys welding table

    This is our welding table I have made two of these one for work and one for our shop It is 1/4 x 4x8 and 3 inch channel legs with 2 inch angle frame heavy expanded metal on bottom.It has 4 recepticals at each end works real well.
    Click image for larger version

Name:	tmpphp4EB9aP.jpg
Views:	1
Size:	69.5 KB
ID:	490930

    Click image for larger version

Name:	tmpphpIfGV6e.jpg
Views:	1
Size:	66.6 KB
ID:	490931

    Click image for larger version

Name:	tmpphpQslc7J.jpg
Views:	1
Size:	76.3 KB
ID:	490932

    Click image for larger version

Name:	tmpphpzNUxOA.jpg
Views:	1
Size:	66.8 KB
ID:	490933

    Leave a comment:


  • monte55
    replied
    I know what you meant Mac.........I was just being awnry

    Leave a comment:


  • MAC702
    replied
    Originally posted by monte55 View Post
    I doubt you can level it with one adjuster unless it's a three legged table, and that would only be on one axis. What about three adjusters and one leg.....maybe that needs more thought
    Sorry, I said "level" but I was thinking something else. Good catch. One adjustment will allow you to prevent the table from rocking on any surface. But yes, you would need more adjustments to truly "level" it. Thanks.

    I usually just shoot for level in one axis (on both sides). That guarantees that it doesn't have a bind, which is all that's important for most fabrication.

    So, probably just putting the adjustment on each leg is best for meeting any need.

    Leave a comment:


  • monte55
    replied
    Originally posted by MAC702 View Post
    Great idea, especially when you drag it to different spots in a shop and no floor is perfect.

    For just leveling purposes in fact, you only need the adjustment on one leg.
    I doubt you can level it with one adjuster unless it's a three legged table, and that would only be on one axis. What about three adjusters and one leg.....maybe that needs more thought

    Leave a comment:


  • monte55
    replied
    Originally posted by SkidSteerSteve View Post
    Just had an idea to start a project specific thread. On this just post ideas and pictures for various welding tables that you have built or use regularly. This way we can start compiling information for easier research instead of looking for a dozen different threads. Not to sound rude, but if your table is simply a slab of plate with four legs, you might abstain from posting. On the other hand, if you have an idea that you think the rest of us would benefit from, by all means post away, especially with pictures. SSS
    How about a slab, four legs and a dead chicken? Now that's funny....I don't care who you are
    Last edited by monte55; 04-04-2007, 05:26 PM.

    Leave a comment:


  • MAC702
    replied
    Originally posted by atpav8or View Post
    ...I wanted to put some type of threaded rod or screw-type thing on the legs so that the table could always be leveled and could be adjusted to the height of the table saw, BS, drill press, etc.
    Great idea, especially when you drag it to different spots in a shop and no floor is perfect.

    For just leveling purposes in fact, you only need the adjustment on one leg.

    Leave a comment:


  • MAC702
    replied
    I've got some nice slab tables. Very handy for many things. But more of my tables are a skeleton design, of various sizes. This allows clamping at many different locations within the framework of many fabrications. Some of these tables are very lightweight, others are made from 5/16x3x4" angle. When I get a job that a current table won't do very well, I build another table. Eventually, it's rare that I don't have a table that does the next job.

    I'll have to find some pictures later.

    Leave a comment:


  • atpav8or
    replied
    Welding Tables

    Great idea! I was going to use the Miller project table on this website but I wanted to put some type of threaded rod or screw-type thing on the legs so that the table could always be leveled and could be adjusted to the height of the table saw, BS, drill press, etc.

    Leave a comment:


  • SkidSteerSteve
    started a topic Project Specific Thread: Welding tables

    Project Specific Thread: Welding tables

    Just had an idea to start a project specific thread. On this just post ideas and pictures for various welding tables that you have built or use regularly. This way we can start compiling information for easier research instead of looking for a dozen different threads. Not to sound rude, but if your table is simply a slab of plate with four legs, you might abstain from posting. On the other hand, if you have an idea that you think the rest of us would benefit from, by all means post away, especially with pictures. SSS
Working...
X