Start/crater and pulser board for Sync 351

[Compchassis]

Can anyone give me an idea of what these 2 boards cost for the Sync 351? They are part number 147171 and 147172, machine serial number is KH389068.

Looked all over the miller site and cant seem to find any info on parts.

Thanks

[Compchassis]

back to the top

[Engloid]

The pulser board for the syncrowave 250 runs about $140-190. that will give you some idea what it should cost you. It will just plug right in...nothing complicated to do at all.

the crater fill....it's useless. Save your money.

[Compchassis]

Some of the areas I have to get into to weld makes it almost impossible to get on a foot pedal. The description of the crate fill sounded like exactly what I needed in order to use a momentary button and keep from creating a crater on shut off.

Do they really not work that well?

[Engloid]

You can do the same thing with a on/off remote switch...just by bumping it a couple times at the end of the weld.

Or you can get a fingertip remote that will eleminate the foot pedal.

[clintonwelding1]

engloid,

holy crap nice looking welds.

as for the post look on the miller site for the manual and get some part numbers