TIG Hose Fitting Replacement

[elkvis]

I have a CK superflex hose/power cable for a 9/17 torch, and one of the fittings broke the first time I tried to screw it into my dinse adapter. CK warrantied the whole kit - torch, hose, and adapter - and the broken one currently works in its broken state. It is tight enough not to leak. I simply can't disassemble it without cutting something. Is it possible to put a new fitting on the end of the hose? Where could I source one? I've googled, but came up with nothing but pre-assembled hoses with fittings already installed. The local welding supply (Mississippi Welders Supply) said they couldn't do it, and I should just buy a new hose (of course). If I can fix it for <$20 instead of an $80 hose, I'd like that a lot better.

[ryanjones2150]

Post some pictures. I’ve repaired my tig hoses before. HTP sells several different replacement fittings for welding machine adapters.

[Helios]

Something like this work?

https://www.arc-zone.com/Hose-Repair-Kit-A-HRW-316BL

[Weld dr]

If you are talking about the power cable there is no fitting available. The weld cable is connected to both ends and the coolant runs through the fitting.

[elkvis]

It's not a water-cooled torch. It's a 17. The fitting I need would screw into a 9 or 17 torch or the appropriate adapter, and would carry electric current as well as shielding gas.

See photo for reference.

[Weld dr]

No fitting is made for the cable repair water or air sorry we just scrap them.

[elkvis]

As a hobbyist, whose equipment rarely makes me money, I'm reluctant to simply throw something away, when it could be fixed, if only parts were available.

[justBill]

I had the same problem. My local Airgas dealer ordered me a new fitting direct from CK and that fixed the problem.

[Ltbadd]

Go to Western Enterprises and look there, if they have what you need get the part number and order from a (local) distributer