Announcement

Collapse
No announcement yet.

Replacement Mig Gun MM211

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacement Mig Gun MM211

    I have a new to me inverter MM211 with an HTP flex mig gun. I would like to replace it but am somewhat confused which one to buy. I have 220 in the garage. Max output is 150A and suggested is the MDX100. If you go spool gun they recommend the 150. So is 100A or 150A output?

  • #2
    I would step up to the M-25 series, which is a 250A gun (60% duty cycle I believe, can't remember). HTP sells it too. I used the 15' gun on mine, but in hindsight, I should have stayed 10ft to reduce feeding issues.
    HTP Invertig221 D.V. Water-cooled
    HTP Pro Pulse 300 MIG
    HTP Pro Pulse 200 MIG x2
    HTP Pro Pulse 220 MTS
    HTP Inverarc 200 TLP water cooled
    HTP Microcut 875SC

    Comment


    • #3
      Thanks for the response. I heard about the 15' having issues and hoped it was an isolated issue here or there. I will go with the 250a gun and keep it short I guess.

      Comment


      • #4
        Anything wrong with the HTP gun?


        No need to buy a 250 amp gun for a MM211.

        MM211 is rated 150amps at 40% duty cycle drops to 20% at 200amps

        The MDX 100 is $149.00 It is rated 100amps 100% using CO2 60% using mixed gas.
        MDX 250 is $274.00

        Ed Conley
        http://www.screamingbroccoli.net/
        MM252
        MM211
        Passport Plus w/Spool Gun
        TA185
        Miller 125c Plasma 120v
        O/A set
        SO 2020 Bender
        You can call me Bacchus

        Comment


        • #5
          True, it's not needed but the 10' HTP M-25 gun is about $160, and uses all miller parts except for the liner.
          HTP Invertig221 D.V. Water-cooled
          HTP Pro Pulse 300 MIG
          HTP Pro Pulse 200 MIG x2
          HTP Pro Pulse 220 MTS
          HTP Inverarc 200 TLP water cooled
          HTP Microcut 875SC

          Comment


          • #6
            Originally posted by OscarJr View Post
            True, it's not needed but the 10' HTP M-25 gun is about $160, and uses all miller parts except for the liner.
            That's a good price for the HTP gun.
            Ed Conley
            http://www.screamingbroccoli.net/
            MM252
            MM211
            Passport Plus w/Spool Gun
            TA185
            Miller 125c Plasma 120v
            O/A set
            SO 2020 Bender
            You can call me Bacchus

            Comment

            Working...
            X