Announcement

Collapse
No announcement yet.

Replacement Mig Gun MM211

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuzzytek
    started a topic Replacement Mig Gun MM211

    Replacement Mig Gun MM211

    I have a new to me inverter MM211 with an HTP flex mig gun. I would like to replace it but am somewhat confused which one to buy. I have 220 in the garage. Max output is 150A and suggested is the MDX100. If you go spool gun they recommend the 150. So is 100A or 150A output?

  • Broccoli1
    replied
    Originally posted by OscarJr View Post
    True, it's not needed but the 10' HTP M-25 gun is about $160, and uses all miller parts except for the liner.
    That's a good price for the HTP gun.

    Leave a comment:


  • OscarJr
    replied
    True, it's not needed but the 10' HTP M-25 gun is about $160, and uses all miller parts except for the liner.

    Leave a comment:


  • Broccoli1
    replied
    Anything wrong with the HTP gun?


    No need to buy a 250 amp gun for a MM211.

    MM211 is rated 150amps at 40% duty cycle drops to 20% at 200amps

    The MDX 100 is $149.00 It is rated 100amps 100% using CO2 60% using mixed gas.
    MDX 250 is $274.00

    Leave a comment:


  • Fuzzytek
    replied
    Thanks for the response. I heard about the 15' having issues and hoped it was an isolated issue here or there. I will go with the 250a gun and keep it short I guess.

    Leave a comment:


  • OscarJr
    replied
    I would step up to the M-25 series, which is a 250A gun (60% duty cycle I believe, can't remember). HTP sells it too. I used the 15' gun on mine, but in hindsight, I should have stayed 10ft to reduce feeding issues.

    Leave a comment:

Working...
X