Announcement

Collapse
No announcement yet.

Xmt 350 cc/cv. Spool gun hookup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Xmt 350 cc/cv. Spool gun hookup

    Sitting looking at a xmt I bought. I have a 30a spool gun
    and a WC-24 control. Question should dial be set to Mig or ? Thanks

  • #2
    Originally posted by fishbum View Post
    Sitting looking at a xmt I bought. I have a 30a spool gun
    and a WC-24 control. Question should dial be set to Mig or ? Thanks
    To your XMT 350 power source the spool gun is just another wire feeder. If you have a regular wire feeder already set up (mine is an S-22), unplug it and plug in the cable from the WC-24/30a, then check that the XMT process switch is set to MIG. Simple.
    Miller XMT-350 CC/CV
    Miller S-22A wirefeeder
    Bernard 400A "Q" gun
    Miller 30-A Spoolmatic w/WC-24
    CK 210 & WP-18 GTAW torches
    Hypertherm Powermax 30
    O/A Rig, Enco 4x6 bandsaw, etc.

    Comment


    • #3
      Was afraid of that. When I pull the trigger I here a click in the 24 box but gun is a no go. Tested gun on a buddy’s 252. Any test on the control ?

      Comment

      Working...
      X