Announcement

Collapse
No announcement yet.

trouble with miller 302 trailblazer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cruizer
    replied
    I’d be inclined to say either the solenoid is out of adjustment, oil is not at level, or oil sensor is bad. As seems to be dropping power to the engine.

    Leave a comment:


  • eewjr
    replied
    MAC702 engine is good with 3200 hours on it. Manifested about a week ago, just started all at once. Maintenance is done by our mechanic and was done recently.

    Leave a comment:


  • ShieldArc
    replied
    I would check the idle solenoid linkage adjustment.

    Leave a comment:


  • MAC702
    replied
    Help us help you.

    What is the condition of the engine, including hours? When did the problem manifest itself? How often is the machine used, and who does the maintenance? When was it last serviced?

    Leave a comment:


  • eewjr
    started a topic trouble with miller 302 trailblazer

    trouble with miller 302 trailblazer

    I have been having trouble with my miller 302 trailblazer welder.
    When its in idling position, it kicks in and out, in and out. When its put in the run position, it dies. And both coils get hot.
Working...
X