Announcement

Collapse
No announcement yet.

Multimatic 215 question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RonJon
    replied
    Originally posted by xryan View Post
    If you flip your helmet fast enough you can see the last second or two of the amperage display. No way to record the view that I know of, but call customer service, talk to a product engineer, they can tell you how to get into all the secret menus.
    Nothing magical or secret menus. Just standard advance menus. See https://youtu.be/erDPAzcq4YA

    Leave a comment:


  • Broccoli1
    replied
    ah got ya.



    Leave a comment:


  • Danny
    replied
    Originally posted by Broccoli1 View Post
    Interesting - The MM252 will show actual voltage but there isn't a way to hold that info.

    I imagine the 215 is the same way.
    Ed,

    By "hold timer", I meant that the read out holds the value for a few seconds after a weld is completed. The meters on my Migmaster 250, Fabricator 181i, and Fabricator 211i function this way. I contacted Miller and a weld tech confirmed that the amperage is held for a few seconds after completing a weld.

    Leave a comment:


  • xryan
    replied
    If you flip your helmet fast enough you can see the last second or two of the amperage display. No way to record the view that I know of, but call customer service, talk to a product engineer, they can tell you how to get into all the secret menus.

    Leave a comment:


  • Broccoli1
    replied
    Interesting - The MM252 will show actual voltage but there isn't a way to hold that info.

    I imagine the 215 is the same way.

    Leave a comment:


  • Danny
    replied
    Originally posted by Broccoli1 View Post
    You have a link to the Video?
    Ed,

    If I 've done this correctly, the video should starting out close to the point were I noticed the wirespeed to amperage change. Of course I had the video on full screen when I noticed the display change.

    Well it looks like the video is going to start from the beginning. If you jump forward to 9:30 in the video it places the video close to the point were you can easily see ( in full screen mode) the machine display while the unit is being used to run a bead.
    Last edited by Danny; 10-06-2017, 05:23 PM.

    Leave a comment:


  • Broccoli1
    replied
    You have a link to the Video?

    Leave a comment:


  • Danny
    started a topic Multimatic 215 question

    Multimatic 215 question

    Watching a Miller You Tube video on the unit being used in MIG mode I noticed that the wire speed "read out" transitioned to an amperage value while the operator was running a bead. Miller mentions nothing about this in their literature on the unit. So I was wondering if any one knows if there is a hold timer on the amperage value that would allow you to view it after completing a weld.
Working...
X