Announcement

Collapse
No announcement yet.

225g rebuild

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • D Auger
    replied
    Karin Is this the same machine from the other post?Are you getting spark at both plugs ?also you may have a valve issue and possible carbon buildup .

    Leave a comment:


  • duaneb55
    replied
    Do they go 12VDC(+) while cranking?

    Leave a comment:


  • Karin Bayne
    replied
    I can't find any wire with 47 on it but there is 2 wires clamped together. I'm guessing this is #47. It will turn over but will not start. It backfires it acts like a car does when the timing is off. Thanks for your response.

    Leave a comment:


  • duaneb55
    replied
    I don't have a photo but the red lead from the ignition module (mounted behind the flywheel) goes to the (+) terminal of the coil and the black module lead goes to the (-) terminal of the coil. The black wire #47 from the engine harness also connects to the (+) terminal of the coil.

    Under NO circumstances should you connect #47 or any battery (+) voltage to the coil's (-) terminal or you will destroy the ignition module.

    Leave a comment:


  • Karin Bayne
    started a topic 225g rebuild

    225g rebuild

    Can anyone shoot me a picture of the wiring to the coil on a 1994 or any compatible year onan 16 Bobcat 225g. It would be greatly appreciated . thanks
Working...
X