Announcement

Collapse
No announcement yet.

Millermatic 350P Purchase Questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • H80N
    replied
    Originally posted by Meltedmetal View Post
    Okay, thanks. So the Reach is a suitcase feeder made specifically to work with the larger Miller wire feeder machines of that era and possibly later. I guess it incorporates more features than a regular suitcase feeder?
    The big thing is...... that it will allow you to use the MM350P's pulse capability through the "REACH" feeder up to 50ft away

    I have been told that it is "SYNERGISTIC" with the MM350P....

    they did not sell too many of them.... my understanding was that they worked great.....

    but were never properly marketed... too bad...........

    Leave a comment:


  • Meltedmetal
    replied
    Okay, thanks. So the Reach is a suitcase feeder made specifically to work with the larger Miller wire feeder machines of that era and possibly later. I guess it incorporates more features than a regular suitcase feeder?

    Leave a comment:


  • H80N
    replied
    Here is an old thread on the "Millematic Reach"

    http://www.millerwelds.com/resources...th-miller-350p

    Leave a comment:


  • H80N
    replied
    Originally posted by Meltedmetal View Post
    This then? I'm just trying to help you spend your money. Are they all interchangeable?
    http://www.ebay.com/itm/Miller-Aluma...kAAOSw-0xYTqi4
    Nope........

    this one

    https://www.millerwelds.com/files/ow...44671E_MIL.pdf

    Leave a comment:


  • Meltedmetal
    replied
    This then? I'm just trying to help you spend your money. Are they all interchangeable?
    http://www.ebay.com/itm/Miller-Aluma...kAAOSw-0xYTqi4

    Leave a comment:


  • H80N
    replied
    Originally posted by Meltedmetal View Post
    The XR Alumapro push-pull gun is a direct plug in to the MM350P..... NO control box required....

    the "REACH" is a different animal altogether.
    Last edited by H80N; 12-29-2016, 01:23 PM.

    Leave a comment:


  • Meltedmetal
    replied
    like this one?http://www.ebay.com/itm/Miller-model...-/222330678839

    Leave a comment:


  • H80N
    replied
    Originally posted by FusionKing View Post
    I......I only regret not buying a Reach Feeder when they were available.
    Me too................

    I have yet to see one on the used market

    Leave a comment:


  • FusionKing
    replied
    I've had mine for I'm guessing 7.

    We used it with a whip and a spoolgun for about 5.
    Then I bought the push-pull.....that changed things a whole bunch.
    I only regret not buying a Reach Feeder when they were available.

    Leave a comment:


  • H80N
    replied
    Originally posted by gcally View Post
    Ordered it today. I am a little bit nervous about all the settings but I figured if I was going to put out some major cash on a Mig I might as well setup up to one that has more features than my old one.

    How is the reliability on the 350P? At $4,300 I am in for the long haul on this Mig.
    Have had mine for about 8+ years....NO problems.............

    Leave a comment:


  • gcally
    replied
    Ordered it today. I am a little bit nervous about all the settings but I figured if I was going to put out some major cash on a Mig I might as well setup up to one that has more features than my old one.

    How is the reliability on the 350P? At $4,300 I am in for the long haul on this Mig.

    Leave a comment:


  • gcally
    replied
    Going to pull the trigger. Thanks guys!

    Looks like I will be getting it from IOC. Cyberweld will not price match it.

    Leave a comment:


  • xryan
    replied
    I already have a 350P but almost got another for $1500!!! I friggin missed it by a day or two. Figures though, it was probably hot, even though the redneck didn't seem to know what it was he had. "had it for a few years, light use" there really weren't many hours on it.

    It's super easy to use, not fret about all the advanced features, it's all straight forward. Pulse spray is where it's at! Awesome.

    Leave a comment:


  • FusionKing
    replied
    You will LOVE the 350P.
    If you can set up the 280DX then you won't have any problem with the setup on the 350P.
    And you wont believe the difference. 400 amps of pulse spray. And in straight mig it is an inverter arc source with adjustable induction that uses like half the amps off of your shop electric to do it.
    And the aluminum capability potential......

    Leave a comment:


  • H80N
    replied
    Originally posted by gcally View Post

    Thanks for the info!!!

    The cheapest place I found one was at IOC at $4,295 which is 120 cheaper than cyberweld.
    https://www.weldingsuppliesfromioc.c...FY6CswodHnQHeg

    The MM350P will go real nice with the 280DX Tig runner package I just picked up. I found a 280DX water cooled package for $4,500 that only has 9 hours weld time on it. It also came with a full bottle.
    COOL......

    Leave a comment:

Working...
X