Announcement

Collapse
No announcement yet.

Rotor wiring questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ArmyVetBiker
    replied
    That is what happened, and the way I repaired it, I really appreciate the responses.

    Leave a comment:


  • cruizer
    replied
    Yeah, shoot us a picture please, often the large winding pops out of the slip ring and has to be silver soldered onto the side of the slip ring with low temp "Stay Brite"

    Leave a comment:


  • Farmer Boy
    replied
    not that I know any thing about miller welders, but a picture could be helpful for others,

    Leave a comment:


  • ArmyVetBiker
    started a topic Rotor wiring questions

    Rotor wiring questions

    Having a Monday on Tuesday, was welding with the bobcat 225d and it stopped making power. Long story short, I took it down to the point I can see rotor and windings,2 wires are not attached to anything. 1 larger that goes to the part of rotor where the brushes ride and 1 small goes to rotor windings, it looks as though it goes on a connector on the same part. Anyone know what the larger attaches to and is that something I could repair. Thanks in advance,
    Randy
Working...
X