Tweet
I'm about to start a restoration project on a pick up truck. My mig set up is a xmt 350 and a 74dx feeder. I can't seem to find a part number for .023 wire drive rolls for my feeder. It may not be the best machine to use on body panels anyway. My thought was put a M25 gun on to get away from the 400 amp bernard (to big and bulky for body work) and use 23 wire. Any help with this would be appreciated. I'm leaning toward a 110 volt machine if I can't set this up which is probably the better route anyway so point me in the right direction guys. Thanks
-
Dynasty 400 Wireless
Coolmate 3.5
Aerowave loaded with Sequencer and pulse
Watermate 1A
Coolmate 3
XMT350 CC/CV
D74DX Feeder double the fun
Optima Pulse Pendant
WC24
30A spoolgun
Neverlast 100 amp plasma with Hyper Duramax torch
Avortec 280 mig
GO CNC Poweredge CC/CV pulse and double pulse
Harris Old school 2 stage Oxy/Ace
Victor flow meters
Flametech Duel flowmeters
Just a hilljack in the woods with fancy welding equipment
and a pet Raccoon. -
2- XMT's 350 cc/cv
1- Blue star 185
1- BOBCAT 250
1- TRAILBLAZER 302
1- MILLER DVI
2- PASSPORT PLUS
1- DYNASTY 200 DX
1- DYNASTY 280 DX
1- MAXSTAR 150 STL
1- HF-251 BOX
1- S-74D
1- S-75DXA
2- 12-RC SUITCASES
1- 8-VS SUITCASE
2- 30 A SPOOLGUNS -
Put an M-15 gun on its even less bulky that the M-25...BobBob WrightComment
-
I'll have to order 2 sets of those rolls as I have dually rolls but I never thought about that. Thank you. I'll look into the m15. I've never help one.Dynasty 400 Wireless
Coolmate 3.5
Aerowave loaded with Sequencer and pulse
Watermate 1A
Coolmate 3
XMT350 CC/CV
D74DX Feeder double the fun
Optima Pulse Pendant
WC24
30A spoolgun
Neverlast 100 amp plasma with Hyper Duramax torch
Avortec 280 mig
GO CNC Poweredge CC/CV pulse and double pulse
Harris Old school 2 stage Oxy/Ace
Victor flow meters
Flametech Duel flowmeters
Just a hilljack in the woods with fancy welding equipment
and a pet Raccoon.Comment
Comment