Announcement

Collapse
No announcement yet.

Help! Synchrony 350 shocking me

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kpack
    replied
    Was it kicking the breaker ? If not you better check your breaker panel. Glad you found the problem.

    Leave a comment:


  • Basicwelder
    replied
    I found the problem , behind the front lower plastic cover/ front of machine/ is (2 )3/8 headed bolts that hold the lower HF coil .. They were out and the coil was lying on the ground of machine and the 110. Receptacles ... Have a nice day

    Leave a comment:


  • Basicwelder
    replied
    Syncrowave 350 LX

    Leave a comment:


  • Basicwelder
    started a topic Help! Synchrony 350 shocking me

    Help! Synchrony 350 shocking me

    I have a synchrony 350 and the ground clamp is reading 104 ac VoLTE on all 3 weld positions .. I have removed the cord ground and checked from the ground clamp back too a water pipe and it's still there .. Would you say that one of the diode panels is shooting the current back the other way .. Any help is appreciated
Working...
X