Announcement

Collapse
No announcement yet.

Aerowave 300

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MartinB
    replied
    Update Aerowave repaired!!

    For anyone in the UK give these people a try Specialist Machine Parts 01299 878965 Brilliant firm to deal with and the machine repaired in under24 hours.
    The good thing is they repair boards in-house ( at a fraction of the cost of a new board) and they can even rewind transformers. A breath of fresh air in this time of "oh that machine is not repairable but we can sell you a new one"

    Thanks for the use of the forum.

    Leave a comment:


  • MartinB
    replied
    Thank you for you advice, unfortunately here in the UK the Miller dealers may not be as helpful as those in the USA, but I will give it another try.

    Thanks
    Last edited by MartinB; 02-16-2016, 01:40 AM.

    Leave a comment:


  • Miller Welders
    replied
    Hi Martin,

    We recommend reaching out to your nearest distributor for help with the right components. To find a distributor near you, please use the following link:https://www.millerwelds.com/where-to-buy?buy=1

    If you have any further questions, please let us know. Thank you.

    Leave a comment:


  • MartinB
    replied
    I understand that but the board still will need repairing.

    Leave a comment:


  • cruizer
    replied
    Highly unlikely it's just a resistor, something had to surge to take out the clamp board. And it's never just the clamp board that blows.

    Leave a comment:


  • MartinB
    started a topic Aerowave 300

    Aerowave 300

    Hi I have a seriously burnt up Clamp board from my Aerowave, I am pretty certain it is repairable if I can find the component values. I have a Tech manual but the circuit doesn't show any values?

    I need the value of R1 and the ceramic disc capC7 above RC1

    The board No is141390.

    Any help please

    Cheers
    Martin
Working...
X