No announcement yet.

Part numbers wanted for a Tig torch

  • Filter
  • Time
  • Show
Clear All
new posts

  • Part numbers wanted for a Tig torch

    I have a Dynasty 200 with a WP20 torch.
    I have a project that is difficult to access with the standard # 6 or #8 nozzle attached.
    So what I want to get is.........
    A gas lens--- 3/32 size.
    A long or extra long #6 nozzle
    3/32 collet holder to fit the gas lens
    And of course a 3/32 collet

    First of all are such parts made, and if so can someone give me the part numbers so that I may order the correct parts?
    Thank you.

    Dynasty 200 DX_set up on 3 phase
    Coolmate 3
    MM 251 w/ Spoolmatic 30A
    HTP 625 Micro Cut Plasma Cutter
    Victor O/A Rig
    Bridgeport Mill_3 phase (w/ Acu-Rite 4 axis DRO)
    10 inch South Bend Lathe_3 phase
    Baldor Double Cup Tool Grinder_3 phase
    Baldor 10 inch Buffer
    Rockwell 12 inch Disc Sander
    Cyclone 2ft X 3ft Bead Blast Cabinet
    Quincy 325 2stg- Air Compressor_3 phase
    Graymills Built-in Parts Washer
    Rockwell/Delta Planer, HD Shaper, Uni-Saw etc.