Announcement

Collapse
No announcement yet.

xmt 350 cc/cv fan on demand

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cruizer
    replied
    The fan will run at idle as even when not welling, its internal parts are always charging and discharging making its heat sink hot.

    Leave a comment:


  • sledsports
    replied
    Thanks for the help guys

    Leave a comment:


  • fabricator
    replied
    Yep , mine do the same also.

    Leave a comment:


  • 1997CST
    replied
    No reason for concern. If the thermistor senses it has cooled enough the fan will shut off. Heat may still be built up and it will cool it again.

    Leave a comment:


  • sledsports
    started a topic xmt 350 cc/cv fan on demand

    xmt 350 cc/cv fan on demand

    Ive been working in the shop today and used the machine more today than its been used in about 4 months. It set idle powered up for about 2 hrs while I was doing some burning and I noticed the fan would run for long periods of time and shut off for a very little period then start right back up. It welded fine in both the mig and stick modes. It's the first time I've noticed it doing this. Reason for concern?
Working...
X