miller 10e feeder

[duaneb55]

What 1997CST said. Resistor R1 - 12W, 10ohm wire wound, Miller PN 030942.

Also make sure the Normally Closed (NC) contacts in Control Relay 1 (CR1) are making contact when de-energized as these complete the brake circuit.

[1997CST]

The 10e uses resistors as a brake. One or more are bad.

[H80N]

I have a miller cp-200 with a millermatic 10e feeder. The feeder has started to feed about 3" of wire out after I let off the trigger. Its like the motor coasts to a stop.
Has anyone else had this problem?
Thanks

spool tension... ??? sticky contactor..??

those are the things that I would check first...

Serial Numbers...??

[6669charger]

I have a miller cp-200 with a millermatic 10e feeder. The feeder has started to feed about 3" of wire out after I let off the trigger. Its like the motor coasts to a stop.
Has anyone else had this problem?
Thanks