Announcement

Collapse
No announcement yet.

New to the forum . NEED HELP FIXING MY BIG 30 MACHINE !

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tex70
    replied
    I looked through the online manual and I couldn't find it . Thanks .

    Leave a comment:


  • Aeronca41
    replied
    Looks like the cap is Miller 605982 from the manual H80N posted the link to. Miller4less has it and it's listed as a 7-lb cap.

    Leave a comment:


  • Tex70
    replied
    How would I find out what the proper radiator cap ? I want to be sure that I get the right pound for the pressure.

    Leave a comment:


  • ryanjones2150
    replied
    It's a doofloppy. Definitely a doofloppy.

    Leave a comment:


  • H80N
    replied
    Originally posted by Tex70 View Post
    Got the new water pump ordered and now installed . Wasn't perfect match on the pulley but was able to find a pulley . Machine now runs great , had it on a test run for 90 minutes and the temperature stayed at 190 degrees. I did notice that the engine was idled high and never idled down . I'll take a pic of the part that I believe I may need , just don't know how to go about buying it since I have no clue what it's called . Lol
    Might you be referring to the idle solenoid.... ??

    https://www.millerwelds.com/files/ow.../O473A_MIL.pdf

    Item# 52 on page #2 Parts diagram (Page# 37 of 50 of the PDF)

    Part# 109 436

    is this the one..??

    http://miller4less.com/product_info....oducts_id=1806

    Leave a comment:


  • Tex70
    replied
    Got the new water pump ordered and now installed . Wasn't perfect match on the pulley but was able to find a pulley . Machine now runs great , had it on a test run for 90 minutes and the temperature stayed at 190 degrees. I did notice that the engine was idled high and never idled down . I'll take a pic of the part that I believe I may need , just don't know how to go about buying it since I have no clue what it's called . Lol

    Leave a comment:


  • ryanjones2150
    replied
    He's a savant of sorts in case you were wondering.

    Leave a comment:


  • Tex70
    replied
    Originally posted by H80N View Post
    I could be mistaken but I believe that the engine is a PERKINS 4.108

    http://www.productmanualguide.com/sh...op-manual.html

    a very popular engine in marine and industrial applications.. so parts are readily available..

    http://www.ebay.com/sch/i.html?_odkw...4.108&_sacat=0

    if you confirm that it is a 4.108 here is a link to a water pump

    http://www.ebay.com/itm/Perkins-4-10...ZV3gJk&vxp=mtr

    Thanks for all the help H80N !!!!!

    Leave a comment:


  • Tex70
    replied
    You are correct . It is a Perkins 4.108 .
    Numbers on Perkins block read . ED70190U
    Then second set of numbers under that read 632016P

    Leave a comment:


  • H80N
    replied
    I could be mistaken but I believe that the engine is a PERKINS 4.108

    http://www.productmanualguide.com/sh...op-manual.html

    a very popular engine in marine and industrial applications.. so parts are readily available..

    http://www.ebay.com/sch/i.html?_odkw...4.108&_sacat=0

    if you confirm that it is a 4.108 here is a link to a water pump

    http://www.ebay.com/itm/Perkins-4-10...ZV3gJk&vxp=mtr


    Last edited by H80N; 10-19-2015, 08:05 AM.

    Leave a comment:


  • H80N
    replied
    Originally posted by Tex70 View Post
    SERIAL # JJ326172

    Thanks for the instant replies . I'll shoot some pics and post them ASAP ! Thanks Ryan Jones and h80n .
    This looks like the proper manual to match your "JJ" serial number..

    https://www.millerwelds.com/files/ow.../O473A_MIL.pdf

    Leave a comment:


  • Tex70
    replied
    SERIAL # JJ326172

    Thanks for the instant replies . I'll shoot some pics and post them ASAP ! Thanks Ryan Jones and h80n .

    Leave a comment:


  • H80N
    replied
    Originally posted by ryanjones2150 View Post
    I have no doubt that someone here can help you. Most of the time, they need your serial number to look up the exact machine you have.
    Yup.... posting your serial number is first step...

    next I would download the manual here

    https://www.millerwelds.com/en/suppo...uals-and-parts

    making sure to plug in the serial# to get the correct version...

    post some pics of the welder and engine

    any engine data plates..??
    Last edited by H80N; 10-19-2015, 06:56 AM.

    Leave a comment:


  • ryanjones2150
    replied
    I have no doubt that someone here can help you. Most of the time, they need your serial number to look up the exact machine you have.

    Leave a comment:


  • Tex70
    started a topic New to the forum . NEED HELP FIXING MY BIG 30 MACHINE !

    New to the forum . NEED HELP FIXING MY BIG 30 MACHINE !

    I recently acquired a Miller Big 30 Diesel welding machine Serial # JJ326172 , it needs a waterpump . I bought the machine as is "project" Owner told me it needed a water pump . He had the original water pump but misplaced it , so now that i have the machine , I have no idea on how to go about finding the correct water pump , nothing to compare and match up against . Can anyone here help me in finding the correct waterpump ? Maybe on ebay or another site ?
    Last edited by Tex70; 10-19-2015, 07:09 AM.
Working...
X