Announcement

Collapse
No announcement yet.

Tig?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Paul Seaman
    replied
    Miller used to make a machine called the Shopmaster which was a true CC/CV-AC/DC, I've welded with one of these The mig arc isn't quite as good as my mm210 and the tig was arc was good but on stick was its best. I had an opprotunity to buy one but space for me is a premium and I got a good deal on a dynasty which is a much better tig machine.

    I've seen a few on ebay, mid last year and they went for about $1200 I think, but I've slept since then!

    Peace,

    Leave a comment:


  • jn6047
    replied
    Originally posted by RST200
    They are available now. I would rather have two separate machines myself. Couple of reasons...it would be easier to go from one process to the other when changing settings...I could select the best mig or tig welder for the intended use and budget... an all in one unit may be lacking in performance or features in one aspect or another. just my two cents

    I don't think that anyone makes a machine that does aluminum HF tig and mig. If there is please let me know. Thanks.

    jn6047

    Leave a comment:


  • Paul Seaman
    replied
    JoeBass you got me- I do still love the arc feel of the invision345mp but the mm350p is all of that and much better programability for the aluminum. Maybe you should know I almost compared the two as my favorites but if I were to change out my mm210 it would have to be something special and both of these setups are really trick {mm350p vs. invision345mp w/22a}! I have a special place in my heart for the 345mp since it showed me how to weld and made me retire the red box. After using a 345mp I wanted one but couldn't afford it but I could afford the mm210 which is a beautiful machine and love it!

    I am currently taking a class at the local tech school and can use some of the newest greatest machines and my favorites are as such. Dynasty-300,200, mm350p-invision345mp, and of course my mm210.

    Peace

    Leave a comment:


  • RST200
    replied
    Originally posted by jn6047
    I should also add, that after reading through the Hobart and Miller forums it apears that there is a good deal of demand for a multi-process machine that does aluminum tig. If a company were to come out with something like the syncro 180 with a mig feature I'm pretty sure that it would sell quite well (I know that I'd buy one).

    jn6047
    They are available now. I would rather have two separate machines myself. Couple of reasons...it would be easier to go from one process to the other when changing settings...I could select the best mig or tig welder for the intended use and budget... an all in one unit may be lacking in performance or features in one aspect or another. just my two cents

    Leave a comment:


  • jn6047
    replied
    I should also add, that after reading through the Hobart and Miller forums it apears that there is a good deal of demand for a multi-process machine that does aluminum tig. If a company were to come out with something like the syncro 180 with a mig feature I'm pretty sure that it would sell quite well (I know that I'd buy one).

    jn6047

    Leave a comment:


  • jn6047
    replied
    Thanks for the advice. After reading a few articles on hotrod.com I'm starting to lean more and more towards the syncrowave 180, seems like lots of shops are using tig on the high end cars, even for body panel replacment.

    jn6047

    Leave a comment:


  • joebass
    replied
    Pjs, Weren't you the one that used to rave about the Invision at school? You have used the 350P and the Invision now right? Do you think the 350P that much better? Let me know what you think. I played around with a 350P but not for very long at the local Airgas open house and it was very nice, but I think I like the separate feeder and the use of SMAW better.

    Leave a comment:


  • Paul Seaman
    replied
    jn6047:
    I have welded some nice aluminum jobs with my mm210 and spoolgun. I believe it can do most of what your looking for. If it were me I would go with mild steel tubing and the mm210 w/spoolmate 3035, I own one and have only welded with 1 welder I would have in place of the one I own{the mm350p is it}.

    Good luck with the choice, its a tough one

    Leave a comment:


  • jn6047
    replied
    Maybe this is the answer to go along with the syncro 180.

    http://www.readywelder.com/10000adp.htm

    Leave a comment:


  • jn6047
    replied
    Thanks for the heads up. I was really leaning towards the moly, now I'll definetly reconsider.

    jn6047

    Leave a comment:


  • Compchassis
    replied
    Unless you are building a heads up pro car, stay away from the moly tubing. Not only is it more expensive and harder to work with, it also has a tendency to work embrittle over time and start cracking. A lot of people will tell you that it doesnt, but I have done more than my fair share of repairs on moly cars and no matter who built them, they all seem to crack eventually.

    Leave a comment:


  • jn6047
    replied
    Thanks for all the replys. After seeing some pictures posted here of alumninum mig welding, I think maybe I might go with the mm210 with a spool gun. ****...still not sure. I guess the final deciding factor will be how well and how slow the tig works on sheet metal and how much warpage the mig would cause for my aluminum. I really can't justify having both a mig and a tig at this point, and my Hobart 135 really is too small for a lot of what I'm doing, after using a 210 the welds just do not compare. Thanks again.

    jn6047

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Your 135 would be perfect for sheet metal work and alot of the heavier fab work. Buy the 180 for tig and then you can do your aluminum work and your chrome/moly work also. The 180 with produce beautiful welds, its your skill level that will dictate if that will happen. Good luck with your decision. Scott

    Leave a comment:


  • Guest's Avatar
    Guest replied
    I would also consider a Thermal Arc 185 tsw tig unit also, Alot smaller and uses less power.

    Leave a comment:


  • jn6047
    replied
    I should add that I'm really interested in the Synchrowave 180, it looks just about right to fit my budget, and cover the welding that I need. With practice will the synchrowave welds be pretty enough on my valve covers and such or can those nice welds only be made with a better machine? And just how slow is the Tig process for sheet metal? Perhaps I should look at getting an MM210 using mild steel for my chass/roll cage, and using a spoolgun for my aluminum and grinding down the welds... As you can see, I'm really quite confused.

    jn6047

    Leave a comment:

Working...
X