Announcement

Collapse
No announcement yet.

Got the MM185 working good again

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Paul Seaman
    replied
    Fantastic: sounds like it didn't cost a fortune either, weld on!

    Leave a comment:


  • walker
    started a topic Got the MM185 working good again

    Got the MM185 working good again

    I posted a couple of weeks ago about my MM185 troubles. I would have posted back sooner but my computer took a nose dive, and I had to put in a new hard drive and reload all the software. I was having problems with the wire was burning back, so I changed spools,tips, and on and on. Well, I pulled out the liner and cleaned it out with a radio tuner cleaner spray (ether I think). Then I cleaned all the other torch parts and drive rolls too. I even took the cover off and blew out the inside, and cleaned the contactor. After I reassembly, it works great. Looks like the liner was the biggest problem. When I cleaned it out a lot of black crud came out with the cleaner.
    Thanks for the help, got nice smooth arcs again!
Working...
X