Need some help from the pros,

[HAWK]

JACK IS WACKED!

Now, on a more positive note. I sold my Syncowave 250 today. Just in time too, I found a good deal on a used CK WF-3 cold wire feeder & CWHTL325 watercooled torch. When I receive it and get everything hooked up I'll fill you in on how it works. And if it was or is a good deal...

Pete

Pete,

Let me know on the WF-3.

[Bulldog]

Congrats! keep us posted.

[pgk]

JACK IS WACKED!

Now, on a more positive note. I sold my Syncowave 250 today. Just in time too, I found a good deal on a used CK WF-3 cold wire feeder & CWHTL325 watercooled torch. When I receive it and get everything hooked up I'll fill you in on how it works. And if it was or is a good deal...

Pete

[Brass Monkey]

No Love In This Thread

IM NOT SEEING MUCH CONSTRUCTIVE BANTER ABOUT WELDING IN HERE. BUT THE DRAMA WAS A BIT ENTERTAINING

[Bulldog]

Hey Storts,
I've got to say with all your miss spellings and words missing I don't know how anyone could figure out what you were asking anyway... Now that your done with Miller and you sold all your stock are you going to LEAVE the site!
Oh, and THIS morning I read that you asked me if I would sell you my MILLER MM210. I guess you really are done with MILLER! It's just to funny.
Bulldog

[cope]

the only thing i dont understand is why does it show Andy on line?,Jack

If you log in and don't log out you will stay"on line" with the forum.

[mking7]

Lincoln does not have a board,

That was my point.

Dan a Great Guy,

Absolutely agree. He is a great asset to this board and the Hobart board.

and got a call from my broker,(whew) Im out of miller in my portfolio,,

Your decision. If I was your broker I would caution you against making an investment decision based soley on not receiving a reply to an internet message board question you posted after business hours.

so, why "DUDE" does it show that the boss man Andy is on line when he is not?

I think he answered that question if you read his post.

S Berry, is also a very SMART MAN,,

No argument here. Sberry has been kind enough to help me several times and I appreciate it. BUT, if he didn't respond within 4 hours of me posting a question (regardless of whether he was shown 'on line' or not) I would not buy my strawberries from someone else and sell my Urka Farms stock.

Everbody needs it YESTERDAY!!! so have a Nice day "DuDe

That is true in most businesses. If it had been me, I would have likely begun my research prior to selling my current machine so I could take my time and make sure I got the machine I needed. This would apply to any business, not just welding.

I am sure you will have to reply and have the last word so this will be my last post.

Just fyi, 'Dude' is back. I was not alive in the 60's so I didn't know it was popular then but trust me, it's used quite often these days. 'Groovy' and 'Far Out' are not used, however.

[storts]

Thanks Hawk

STORTS (JACK),

Hey man my sincerest apology for not grabbing your thread. I try to watch the forum pretty close. I do not work for Miller, but have tons of experience with multi-process welding and a good knowledge of Miller equipment. I stay on here because I like and as a help to Andy and others.

As Andy and the other guys have already mentioned give us a chance. Occassionally we miss something. All of us have full time jobs as welders, business owners or other careers, and welding as a hobby. The bottom line is we can't be everywhere at once.

Good luck with whatever you choose to do. Even if you go Lincoln and want to post we welcome you. There is a lot of Miller equipment on the forum and there is also Lincoln and Thermal Arc. There's a great thing: A bunch of good folks with multi-brand experience.

Thats what makes a good guy from some of the others,,your TOP NOTCH, the only thing i dont understand is why does it show Andy on line? I was asking, so i made my desision, (I should be taking spelling lessons,LOL) Thanks for being one of the Good Guys,Jack

[ASKANDY]

I'm going to say it again...

I'm glad you're happy now. Really.

Weld on.

no need to keep draggin this out.


a-

[storts]

Yes I did

Sheeeez, have you checked your Cheerios?

Cant say on any board what it spelt

[storts]

Well DUDIE

Dude, you posted this at 6:43pm central yesterday accroding to the time stamps on the thread. Then by 2:34am you are on your third post throwing a fit because nobody responded? RELAX....

Even IF it was Andy's sole job to monitor the message board and respond, do you think he would do it 24hrs a day? Plus, if you tried the search function you would have likely found a ton of answers. Or, if you are in THAT big of a hurry, call a dealer or Miller on the phone.

Plus, you seemed to get help from the Hobart board (also sponsored by ITW [owner of Hobart and Miller]). Dan responded quite well to your questions over there and you should understand that most of the people on this board are also on that one. If people see you are getting help on one they probably aren't going to repeat the same answer on both.

Just out of curiosity, did you get any info on the Lincoln board yet? Oh, that's right.........

BREATHE............

Lincoln does not have a board,Dan a Great Guy, was Looking for all opinions, and i checked who was on Line, and saw DUDE Andy on the line, Hobart was great, just responded to Andy, and got a call from my broker,(whew) Im out of miller in my portfolio,,and just played with my brand new lincoln, and love it, so, why "DUDE" does it show that the boss man Andy is on line when he is not? I was also looking for a answer from Pile Buck, because he seems to me one of the smartest people i have EVER met, espically with the any welding project, S Berry, is also a very SMART MAN I was looking for as many people to reply,as i could, so "DUDE" I think ive answered all questions,,ant more questions, just reply"DUDE",Jack, PS if you know anything about the welding buisness , Everbody needs it YESTERDAY!!! so have a Nice day "DuDe

[HAWK]

STORTS (JACK),

Hey man my sincerest apology for not grabbing your thread. I try to watch the forum pretty close. I do not work for Miller, but have tons of experience with multi-process welding and a good knowledge of Miller equipment. I stay on here because I like and as a help to Andy and others.

As Andy and the other guys have already mentioned give us a chance. Occassionally we miss something. All of us have full time jobs as welders, business owners or other careers, and welding as a hobby. The bottom line is we can't be everywhere at once.

Good luck with whatever you choose to do. Even if you go Lincoln and want to post we welcome you. There is a lot of Miller equipment on the forum and there is also Lincoln and Thermal Arc. There's a great thing: A bunch of good folks with multi-brand experience.

[Wheels]

Sounds like someone is the center of the universe!

[rb455ho]

Andy,You can please some of the people some of the time but never all of the people all of the time. Don't worry about it. This forum is great and very helpful. Thanks to all for there valuable input.

[ASKANDY]

Like I said JACK.

If this was all I did, you would have had a response. My light stays on sometime 'cause I forget to sign off sometimes.
Glad to see you got what you wanted. All is well.

andy