"Guage" conversion anyone?

[Paul Seaman]

I used to have one that was a 6-8 page book with normal material strength, torsion, ductility, and hardness listed as well as lengths. I lent it to a classmate and he never came back to class, I would like a new one if any of you see such an animal let me know. I gave $6 for the old one. My metal supplier doesn't even sell them anymore, go figure!

[Scott V]

Here is another one.

http://www.engineersedge.com/gauge.htm

[leeave96]

My experience with sheet metal gauges is one of complete confusion from the engineer, vendor, purchasing agent and shop floor fabricators. It seems that EVERYONE has a different idea and chart as to what the real thickness of the metal is. The best answer IMHO is to specify the decimal thickness of the metal with some tolerance.

Bill

[Rocky D]

Cope posted a chart which I made up on Excel...the numbers I got were from one of those round thickness gauges. The gauges are not absolute, which is why you find different numbers on other charts...the mill tolerances on the sheet steel vary quite a bit....you could have mic'ed a sheet to 19 ga and have it still called 18 ga. 16ga is 1/16" and 10ga is 1/8" even though it may measure different. Don't lose any sleep over it.

[Revlimit]

Wow, thanks everyone. I spent at least an hour on the net searching for these charts. Don't know how I missed them. I'm going to make a few copies and post them in the shop. Thanks again..Rev

[honk]

Nope, it's a border collie.....we needed a frizzbe catcher

Yep. Unfortunately there comes a time in every man's life when he realizes that catching his own frisbees has become a physical impossibility, and the wise man seeks help in this, and knows that there is no shame in doing so.

[Sundown]

George, I hope it's not a Golden; they'll eat the mig hose and welding cables.

Nope, it's a border collie.....we needed a frizzbe catcher

[cope]

A while back I did a lot of research on the internet becasue I had the same question as RevLimit. So I came across several charts and the I noticed the charts did not match up for the same gauge number and then I found the chart in the link below...take a look

http://www.corrugated-metals.com/gaugeindecimals.html

Chris, thanks for the link. I collect all the charts I can find.

[cope]

Thanks Alan, the one I had got ate by the new puppy

George, I hope it's not a Golden; they'll eat the mig hose and welding cables.

[ChrisV]

A while back I did a lot of research on the internet becasue I had the same question as RevLimit. So I came across several charts and the I noticed the charts did not match up for the same gauge number and then I found the chart in the link below...take a look

http://www.corrugated-metals.com/gaugeindecimals.html

[Sundown]

Thanks Alan, the one I had got ate by the new puppy

[Paul Seaman]

Cope:
I've wanted a copy of that chart for a while and now I've got one thanks to you.

Thanks a bunch!

[cope]

Will this one work?

[Revlimit]

Does anyone know the thought process behind the term "guage?" For example, using 16 guage stainless sheet converts to about 0.065" as far as I know. I've never seen a conversion, but would like to get familiar with these values if they are available. Any help would be appreciated. Thanks.