Announcement

Collapse
No announcement yet.

Swivel head mig guns

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    Scott V, Thanks for your reply,
    Laurence

    Leave a comment:


  • Scott V
    replied
    No,
    I had a 300 powermig but moved on to this unit. I can add pulse/meters/dual schedule to the feeder for a little over $500.00. Which I might do at a some point. I happen to really like the way this unit does non pulsed aluminum welding.

    I have heard from people that have used both the the MM 350 has a very sweet-arc like the esab. I only seen demo's in aluminum, but I have not used one. I do like all the extra setting on this esab over a XMT unit.
    Attached Files

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Hey Scott V You have a MM350 with pulse don't you? Give me the heads up on the pulse feature on that unit would you? You have me looking at one of them off a diffrent forum if you are one in the same

    Leave a comment:


  • Scott V
    replied
    Originally posted by drscotch
    What exactly is the main advantage to these aftermarket guns as compared to the M-25 that came (and still works) on my Millermatic 250?

    Thanks

    The main advantage the guns stays quite a bit cooler when using in the spray-arc mode. The M-25 is pretty light duty if you spray much. Like I said before, the 400 amp Tregaskis is a much better overall unit.


    lramberson,
    I am all out of Benards at this time. I had one Benard I missed and it was a 200 amp 12ft unit on my L-N9 gma feeder. That one was worth keeping, and performed really nice.

    The nice option with the Binzel, is the mig machine welding tips available for them. They cost almost twice as much, but last four or five times longer then standard CU tips.

    Leave a comment:


  • drscotch
    replied
    What exactly is the main advantage to these aftermarket guns as compared to the M-25 that came (and still works) on my Millermatic 250?

    Thanks

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Scott V, Sorry to hear of your dissappointment with the Bernard units, I have had great service with mine, I cannot say that there is not a better system out, but the unit I have is more than I require at this time.. I do not need to run the thinner wire that you or Hawk need or use. I have received excellent service also on a couple of questions I needed to get direction on and even some free tips(at a Miller Days Show) that are still in the box a year later
    I would be interested if you would like to get rid of that Bernard in the picture( e-mail directly) and see if we can work something out...
    I will check out the Binzel units for future needs, You seem to feel they are superior & I am always open to new options

    Leave a comment:


  • HAWK
    replied
    Originally posted by Scott V
    I found a picture of one I won't miss.

    Scott,

    If you find any more of these (Bernards) you won't miss, email me and I'll give you and address to send them to. I would much rather repair and use them as for you to be unhappy looking at them.

    Leave a comment:


  • HAWK
    replied
    Originally posted by Scott V
    Every time I would switch back and forth the Binzel has been better. Cleaner arc with .030. I sold all my Benards and I am real happy about it too. Look at the Binzel liner setup. They don't even make a ..023 or .030 stand alone liner for their guns just a .023/ .035

    For a test take a 15 ft Benard with a standard .035 liner and try feeding .023 wire through it. Try the same thing with a Binzel gun and get back to me on that!!!

    Scott V,

    I would love to take the Binzel "Challenge". However, I do not see the need to plunk down additional money for a Binzel gun when I have more than I need already. If Binzel would send a demo, I would be more than happy to test their product with an open mind.

    Thank you for the information on the liners and feed problems. Perhaps the reason I have not experienced feed problems with the .023" wire is because I have a custom built gun from Bernard built especially for the smaller .023" wire. It is rated at 150 amps and that is all it is made or used for. My 250 amp gun has the standard .035"/.045" liner and I run bare wire and flux core from .030"-.045" in it. I have never had a problem.

    I can speak only for the Bernard Guns I have and I hate to hear you do not like yours. I wonder if I just got lucky and recieved some good guns? I don't know. Enjoy your Binzels and if I have the opportunity to test one, I will certainly give it an honest evealuation and let you know.

    Leave a comment:


  • Scott V
    replied
    I found a picture of one I won't miss.
    Attached Files

    Leave a comment:


  • Scott V
    replied
    Originally posted by pjseaman
    I found the tweco site, www.tweco.com, they are built like a brick outhouse but too bulky for me. I prefer the bernard model also but I would rather have rigid mount m25 than a bulky tweco swivel. I am just giving options and opinions

    Peace,

    I have both these guns too. The 250 is esabs clone of the M-25
    The 400 amp version is not much bigger and has a better trigger setup. I think that gun is really nice too.

    http://www.esabna.com/ESAB/showdetl....D=1731&CATID=9

    Leave a comment:


  • Paul Seaman
    replied
    I found the tweco site, www.tweco.com, they are built like a brick outhouse but too bulky for me. I prefer the bernard model also but I would rather have rigid mount m25 than a bulky tweco swivel. I am just giving options and opinions

    Peace,

    Leave a comment:


  • Scott V
    replied
    Originally posted by HAWK
    SCOTT V,

    Both are nice guns! However, I simply cannot imagine anything feeding better than my Bernards. More convenient? Maybe. Feed better? You lost me there.

    Some of my Bernards are factory Q guns and some are custom made for my applications. Either way I would have to put numerous hours on anything to even begin to believe it was even in the same class as a Bernard.
    Every time I would switch back and forth the Binzel has been better. Cleaner arc with .030. I sold all my Benards and I am real happy about it too. Look at the Binzel liner setup. They don't even make a ..023 or .030 stand alone liner for their guns just a .023/ .035

    For a test take a 15 ft Benard with a standard .035 liner and try feeding .023 wire through it. Try the same thing with a Binzel gun and get back to me on that!!!

    Leave a comment:


  • HAWK
    replied
    Originally posted by Scott V
    Here is a better upgrade. I had four Benard with three of them the Q guns, but these feed much better. It really cleans the arc up. If you do get a Benard be sure to seat the head real well the first time or they have been known to get hot. I never had a problem but my friend the sells them warned me about them.
    The 350 amp Binzel cable is way more flexable then the Benard 350 amp.

    The guns in the picture is a 250 and a 180 with a extra 350 amp head.
    They all fit on each other which makes it pretty cool. The body is the same.

    http://www.binzelusa.com/
    SCOTT V,

    Both are nice guns! However, I simply cannot imagine anything feeding better than my Bernards. More convenient? Maybe. Feed better? You lost me there.

    Some of my Bernards are factory Q guns and some are custom made for my applications. Either way I would have to put numerous hours on anything to even begin to believe it was even in the same class as a Bernard.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Thanks, that is exactly what i was looking for.

    Leave a comment:


  • Scott V
    replied
    Here is a better upgrade. I had four Benard with three of them the Q guns, but these feed much better. It really cleans the arc up. If you do get a Benard be sure to seat the head real well the first time or they have been known to get hot. I never had a problem but my friend the sells them warned me about them.
    The 350 amp Binzel cable is way more flexable then the Benard 350 amp.

    The guns in the picture is a 250 and a 180 with a extra 350 amp head.
    They all fit on each other which makes it pretty cool. The body is the same.

    http://www.binzelusa.com/
    Attached Files

    Leave a comment:

Working...
X