Announcement

Collapse
No announcement yet.

movies

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bigwelder
    replied
    from what i am gathering in the video ur wire feed is to fast which is causing the popping buzz that u hear and your gun angle isnt slanted enough i have the same problem when i hold my gun at 90 degree angle to the work instead of the recommended 45 degree slant.

    Leave a comment:


  • dyn88
    replied
    Thats a one and a half inch wide pass I went about four inches in that video. this should give you an idea on how to scale the video. Im not making cirles its a side to side movement bunrning the two edges and filling the middle over the previous pass. The puddle is about 1 inch in diameter. the total fillet is two inches and I realy want to single pass it(should be possible with the available power).

    Leave a comment:


  • GaryM
    replied
    I was kinda under the impression that when you are trying to spray weld with mig you dont move in circles like you are in the vidio. Kinda Seems like you are moving around way to fast. and the length of you stick out looks like you are long arching it, move your cup a little closer and if you cant do that because your cup will hit the metal. set your tip out a little.

    This is just me and i may be wrong but that is what i would do.


    Gary

    Leave a comment:


  • dyn88
    replied
    what am I doing wrong? why cant i get a spray with the 1/16 hobart fabcore(metal core wire)? This is the smoothest I can get it to run. Any less feed and I get no arc(burns back). Im at 30 volts and 450 amps. I can pulse but when I try I get the same arc but it buzzes(Ya i know pulse will cause a buzz).

    Leave a comment:


  • Blown S-10
    replied
    please explain for the bandwidth impaired.

    Leave a comment:


  • arcdawg
    replied
    okay and the point of that was ?

    dawg

    Leave a comment:


  • Tanner
    replied
    uploading now Dyn, I'll edit this with the link when it's done

    EDIT - PLEASE right click on the link and select 'save as'

    http://tanner.mikemel.com/dyn88.mpg

    Leave a comment:


  • dyn88
    replied
    dont be sorry for doing me a favor man. Thanx

    Leave a comment:


  • Tanner
    replied
    Its downloaded onto my computer, but I'm having some server troubles. It'll be up tomorrow afternoon.

    Sorry for the delay

    Leave a comment:


  • dyn88
    replied
    thanks tanner here it comes.

    Leave a comment:


  • Tanner
    replied
    hey dyn88,

    Shoot me an email off to tannergregory at gmail dot com, and I'll host it on my server for ya

    Leave a comment:


  • Teeps
    replied
    just post a link to it, and put it on some webspace.
    How big is the movie? or did you not put it on your computer yet?

    Leave a comment:


  • dyn88
    started a topic movies

    movies

    How can I post a movie. I would like the opinions from the members on this board on this pass, but I think itll be easier to opinionate if you could see and hear whats happening.
Working...
X