Announcement

Collapse
No announcement yet.

what to buy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hankj
    replied
    Iram,

    Looks like you've got it all!

    Is your garbage disposal a 480V, 32 horse job??

    Hank

    Leave a comment:


  • lewis
    replied
    what

    thaks to all

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Agree with the others 210 is a sweet machine, 251 is SWEEEEET machine ( I am a bit bias) just a bit more juice & duty cycle. I have the Tool Man Attitude and always buy more than I need, I have never been sad I did it that way UH UH UH MORE POWER BIGGER MIG GUN UUUUUUUUHHHH.
    It's only money, you cannot take it with you ...

    Leave a comment:


  • Bendaman
    replied
    I also agree with the others, I have used both the MM210 and the MM251.
    I also have aMM250X at home. These are all great machines for automotive
    and bike fab work. If at all possibile try to stay in this group of machines.
    They are a little more money, but I think you will be happier in the long run.

    Leave a comment:


  • Paul Seaman
    replied
    I agree with the other fellows but for the bang to buck ratio the mm210 w/spoolgun is the best around $1800 plus tank rental or purchase.
    Peace,

    Leave a comment:


  • cope
    replied
    I had the choice between a MM210 and MM251. I went for the 210 and I think I made the right choice for my situation. The 210 will cost $1177 and up depending on where you get it, and the 251 will run upward of $1675 or so. If those two are out of your budget you could go with the new MMDVI. Hawk did a test on it and was impressed to say the least. Its just out, but IOC and a couple other dealers aree selling it on Ebay. It costs roughly $100 less than the 210. Here is a link to a dealer, and you can find a post here on the machine.

    http://cgi.aol.ebay.com/ws/eBayISAPI...835864640&rd=1

    Leave a comment:


  • arcdawg
    replied
    go for something like a mm251/ with spoolgun .....they are always running specials on ebay..

    its a nice machine that you can just turn on and weld..........

    dawg

    Leave a comment:


  • lewis
    started a topic what to buy

    what to buy

    help, im looking to buy a welder but not sure what i want. iv done mig and tig in the past.i mostly am going to use this welder to finish my pro street project and fab up bike stuff. i work part time in a welding shop so my wire feed ability is alright. i have also run a tig in the past but its been a while about 5 years. money is the issue for the most part. i want the most for my money as we all do. any input would be great.
Working...
X