If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I like when the members show their work.. Great job & more food for thought on my next setup for the 251
My next project in the cart area will be a low profile unit very similar to your just lower.
Thanks for the incentive.
Fun4 now I didn't see the drawer at first. My computer is down, I'm using a laptop and it's screen is very dark and it makes it hard to make things out. good job man.
i have a box that sits beside the mig on the side the drawer opens (cart 2 pic) when i need more than will go in the drawerthe drawer is 14"X24"X5" so it covers most of my needs and alows me to put the plasma cutter next to the mig if it is needed i put a lot of thought into my all train cart befor i put down the first bead. must have drawn it about 20 times diferntly till i came up with this one.
the wife made me some 1" wide straps with motorcycle helmit loops to tie down the stuf so i can take the bumps of the outside world, and the tires role smooth
sorry i forgot the cart the o/a torch holder has wheel on the back so you can lean it back and rool and still has a flat solid base to atach it to the cart without being wobly
i started puting up my new "storage" shed last night and thought i would share a pic or 2 with you all.It looked a lot smaller on the little pice of papper when i drew it up LOL 19'X22'X17' looks smaller when you draw it LOL
also added a cuple of pic's of my welder cart, made it with 10" ruber tires with tubes so i could role it around the yard and take it out in the country property ther is a spot in the front to strap a tank of shielding gas and a rack on the back that i can put my O/A setup and atach it with 3" pins so all is sucure.i made the drawer out of sume 16gage steel plate. Yes the corners were a drag but mig'ed up ok .
all in all it came out prity sweet and caust me $50.
my older brother got me all the steel for my shed for $0.00 yep that's not a typo all i had to spend was gas to pick it up. i will have to buy, or make the doors. still a small price to pay for 600 sq.ft. it will be coverd in corigated steel 18gage.
Leave a comment: