Announcement

Collapse
No announcement yet.

MM251 plug

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ASKANDY
    replied
    Alex,

    For the most part, you are correct. A X V = W.

    Surge current will determine some of this also but with the MM251, it should run just fine off 50A in any case unless you are into smokin 5/8" plate

    A-

    Leave a comment:


  • Alex
    replied
    Ripshot,
    Don't quote me on this, but I think it's an amps vs volts thing. If you've got less potential (volts), you're gonna suck more current (amps) to get the same output. Amps x Volts = Watts.

    Anybody else have a better/clearer/more correct answer?

    Alex

    Leave a comment:


  • Jim
    replied
    Thanks for the info Alex. I generally have an average of 230V depending on the power company. I have a 50A breaker now. Just curious but why would I need a 60A breaker if the power is less.. ?

    Leave a comment:


  • Alex
    replied
    Hey Ripshot,
    That's exactly the setup I'm using with my new MM251. However, you might want to check your input amperage. The owners manual calls for a 50A breaker if you've got at least 230A. If you're getting less, you should use a 60A breaker.

    Alex
    (love that sound of fryin' bacon)

    CORRECTION to the INSANE reply above:

    Substitute "input voltage" for "input amperage" and "230V" for "230A", and suddenly it makes sense.

    Obviously I've got to:
    1. Have another cup of coffee
    or
    2. Hire a proofreader
    before I click on the SUBMIT button.

    Leave a comment:


  • Jim
    replied
    Thanks for the reply. I just wanted to make sure I had the right outlet when I get it. Thanks again. Jim

    Leave a comment:


  • cope
    replied
    That looks liek the beast. Mots 220 volt machines come with the plug like yours, even if they don't require 50 amp breaker; just simplifies life.

    Leave a comment:


  • Jim
    replied
    This is a pic of the outlet I have now.
    Attached Files

    Leave a comment:


  • imported_Jim
    started a topic MM251 plug

    MM251 plug

    Could someone post a pic of the plug that comes with the MM251. I have a 250V/50A NEMA recepticle now that I use for a PowerMax600. I was wondering if the MM251 can use the same outlet. I have it wired with AWG6 to a 50amp breaker. Thanks, Jim
Working...
X