Announcement

Collapse
No announcement yet.

251 vs 350P aluminum

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tackit
    replied
    Thanks guys, I'll be saving your info.

    Leave a comment:


  • ASKANDY
    replied
    I just got notice that the part number of the push/pull module changed to 195324

    Leave a comment:


  • klsm54
    replied
    AA, at least we both had the same story, and part number...

    Leave a comment:


  • ASKANDY
    replied
    Looks like we overposted each other K

    Leave a comment:


  • ASKANDY
    replied
    The 251 can be adapted to a push pull with an adapter module part # 195161. You still have to purchase a push/pull gun like the edge, Python, or XR pistol type gun. The 350 does not need the whole XR system just the gun assy. The 350 is a much cleaner set up. The push/pull module lists at $499.00

    Hope this helps

    Andy

    Leave a comment:


  • klsm54
    replied
    You can use either a 30-A spoolgun, or, with an adapter (part # 195161) a push-pull gun, on your 251. The 350/350P can also use the 30-A spoolgun or a push pull gun. The difference is, that the 350/350P does not need the Push-Pull adapter, that circuitry is built into that machine.

    Leave a comment:


  • tackit
    started a topic 251 vs 350P aluminum

    251 vs 350P aluminum

    Am I correct in thinking that my MM251 can be adapted to accept a push pull drive system to weld aluminum where the new 350 needs the XR system or 30A spool gun. Thanks
Working...
X