Announcement

Collapse
No announcement yet.

Welding and rewelding Aluminum bike frames

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tanner
    replied
    Blondie,

    I plan on going to my local welding supply store to apply for a summer job soon (I'm only 15, so, I need a job), so maybe I could even bring the cost of the welder down even more. I'll let the board know what happens. Thanks for the replies!

    Leave a comment:


  • Blondie_486
    replied
    Tanner,

    Well if you can afford it I've seen 200DX's going for about 2,600.00 on ebay through Indiana Oxygen Company and I believe BR Welder in Maryland is within a few bucks of IOC. They're both offering free shipping on most of their models and the 200DX is considerably lighter than the Synchrowave 180.

    But I'll bet if you go to your local dealer and let him know what you can get one for on the internet with free shipping to your doorstep they'll do what my dealer did. Go just a few bucks under their prices and throw in a bottle for argon, or something else. But you'll also get local service too, if something breaks while under warranty you don't have to ship it all over timbucktwo.

    Sharpen your knowledge, and cut a good deal!

    Blondie

    Leave a comment:


  • Tanner
    replied
    I ride biketrials, which is like mototrials, but you're on a bike, not a motorcycle. I also race BMX bikes, and those crack too. BMX = bicycle motocross. The wall thickness of the metals I'd be welding are about 1.2mm give or take some. I'd like to keep the cost UNDER $2000 USD, but, if I have to, I can go higher. Might as well buy a quality welder right away than a "get-by" machine

    Leave a comment:


  • Blondie_486
    replied
    Tanner,

    A synchrowave 180 would do the trick for about 1,600.00 or 1,700.00. If your budget will allow it the Dynasty 200DX is an excellent choice, it has a pulse feature that will shake the puddle and bring impurities to the top. It's a little more money by about a grand.

    You need an AC/DC machine to TIG weld aluminum so stay away from the Maxstar line. They're good machines but they're DC only. I'm sure HAWK will see this post sooner or later and he'll vouch for the Dynasty 200DX. I've personally never used one yet but I can't wait to try one!! If I had the money I'd own a Dynasty 200DX based on what I've heard about them from people who have them.

    As far as heat treated frames go, you can weld them but then you'll have to heat treat the frame again. If you're referring to a stress relieved chrome moly frame you can stress relieve the weld area with a torch by heating it to 900 degrees (check with a tempil stick to make sure the temp is right) then gradually cool it down. I don't know if you can do aluminum that way or not. You may have to do the whole frame again.

    Maybe HAWK or Andy will know the answer to the heat treated aluminum.

    Blondie

    Leave a comment:


  • Paul Seaman
    replied
    Tanner:
    This is going to be a balancing act between what you want and what it costs. Most of us know what we can afford to spend and this has a great deal to do with your choice. I am a mm210 owner and love it,with the spoolgun I've done some terrific Aluminum tubing welds, but for tig I am trying to save the money for a Dynasty 200DX. HAWK, Blondie, and Heiti are the real experts on tig machines I just haven't used them enough to tell you the benefits of one over the other.
    Also if you have any dimensions on the materials wall thickness it might help in the suggestions. What kind of riding do you do that creats such bone crushing jars to break a frame that often?

    Leave a comment:


  • Tanner
    started a topic Welding and rewelding Aluminum bike frames

    Welding and rewelding Aluminum bike frames

    Well, I figured it was about time I asked this question - I'd like to start making my own bicycle frames, and do a little bike repair on the side. In my particular type of biking....the riders are lucky to get 6 months out of a frame before it cracks and/or snaps. I was wondering what machine would be best for welding frames (renyolds 851 steel, 7005 AL, U6 alloy, 6061 AL, and cromo), and, is it possible to reweld an aluminum frame even after it has been heattreated? If so, how would you go about re-heat treating it? I've been welding for about a year now (smaw, mig and oxygen/acteleyne) and I know I want to use TIG for the welding/rewelding on the frames. Thanks all for your help.
Working...
X