Wireless Tig Foot pedal

[Gobysky Senior Member Find all posts View Profile Close Gobysky]

http://www.millerwelds.com/products/...s/wireless.php
Part number: 300429

I see on the specifications they do not have the Syncrowave 200 listed. Is there anyway that this remote could be made to work for this machine?

[Gobysky Senior Member Find all posts View Profile Close Gobysky]

Wireless Tig Foot pedal

..?

[blue_tech Senior Member Find all posts View Profile Close blue_tech]

I don't see why it would not. The Sync200 will turn on the output with the closure on pins "A" and "B" in the 14 pin connector and the command of the wireless control willl interface with pins "C","D" and "E". I can't see any reason for it not to work. When Miller lists compatible models they sometimes don't list past models, especially if those models aren't in current production.

[H80N Senior Member Find all posts View Profile Close H80N]

If it has a functional 14pin and a wired RFC Pedal or RHC Hand control works....

then the wireless will work fine...

[Gobysky Senior Member Find all posts View Profile Close Gobysky]

Wireless Tig Foot pedal

Thanks