Announcement

Collapse
No announcement yet.

Miller 225 NT fuel delivery problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cwgrizz
    replied
    Your Welcome, but did you get it fixed? I am assuming you found the problem.

    Leave a comment:


  • rbrinkley
    replied
    Thanks guys

    Leave a comment:


  • eecervantes83
    replied
    The pickup tube acts the Same as a fountain drink straw when it cracks half way and u begin sucking up air. Pull out the hose and replace the section of tubing .

    Leave a comment:


  • cwgrizz
    replied
    Not really familiar with the machine, but it sounds like a typical in tank fuel pick up line problem. Either it has a hole in it part way down in the tank or has come apart part way down in the tank. In effect you have a short pick up fuel line in the tank. That is my guess from what you describe.

    Leave a comment:


  • rbrinkley
    started a topic Miller 225 NT fuel delivery problem

    Miller 225 NT fuel delivery problem

    New here need some help I use this machine every day and when it gets 2-1/2 gallons low on fuel it starves under welding load. fill it back up no problems does great ? Any suggestions would be appreciated thanks.
Working...
X