Trying to find a TIG foot pedal for old Airco welder

[MinnesotaDave]

If it looks like mine (pic attached), it's actually a Miller 330 abp and uses the same foot control.

I see them on ebay on occasion.

[Burnt hands]

Photo of your unit would help.
Seems to be simlar to the Miller 330A/BP series.

These welders used the old remotes with 2 separate 3 conductor cords.
One cord was for the contactor and the other cord was for the current control.
Each cord had a twist-lock type plug on the end.

Bad news is that the remote used a 5 ohm, 150 watt ceramic rheostat for the current control.
The newer aftermarket remotes are not compatible.

Might find one on ebay.

http://www.millerwelds.com/service/locate_om.php?product_name=330A/BP

http://www.millerwelds.com/om/o340c_mil.pdf

[ryanjones2150]

Trying to find a TIG foot pedal for old Airco welder

Try usaweld.com. Call then up and ask. They can usually build it if they don't stock it.

[beastybaconman]

I have an old 300 amp Airco heliwelder that I got from my grandpa and right now it doesn't have a foot pedal so I have to scratch tig everything. Does anyone know where I could find one? The model# is 3a/ddr-225hpa/b-sd, serial# he817638. Any help would be appreciated.