Announcement

Collapse
No announcement yet.

mm35 wirefeed problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cruizer
    replied
    Sorry thinking of new machines not real old ones, do you have a skp panel?

    if not, might want to check/ replace control relay cr1

    Leave a comment:


  • hot ticket
    replied
    mm 35 feed problem

    did not think of that, thanks for your help.

    Leave a comment:


  • hot ticket
    replied
    mm-35

    Originally posted by cruizer View Post
    did ya check the fuse on the cct board and make sure your not inbetween ranges
    this model does not have cct board, that I could see. thanks for your help.

    Leave a comment:


  • walker
    replied
    I would jumper the trigger wires before anything else, just because it is easy and a common problem.

    Leave a comment:


  • cruizer
    replied
    did ya check the fuse on the cct board and make sure your not inbetween ranges

    Leave a comment:


  • hot ticket
    started a topic mm35 wirefeed problems

    mm35 wirefeed problems

    I bought a miller 35 a week ago, it worked at the sellers home. I live in the desert area, so I put on a military trailer to bring it home on some bad roads. it worked one time only when I got it home, but not now. every thing seems to work except the feed motor. I checked all connections. found that cr-2 looked bad so I replaced it, still does not work. help!!!!
Working...
X