Announcement

Collapse
No announcement yet.

MULTIMATIC 200 - Screen Diagnostic Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mbramble
    replied
    Mine gives the same message. I checked today when I had to run a couple quick beads with the MIG.

    Leave a comment:


  • Migler
    replied
    Originally posted by Broccoli1 View Post
    is it really a RED stop sign?

    before welding the Voltage and Wire speed are displayed but once you start welding the Voltage and Amps display and hold for a couple seconds after the weld.
    Thanks. It is just as you have described. And no, the HOLD is not really in a red stop sign, it shows as white lettering in the middle of a blue stop sign. I don't have a color LCD display

    Leave a comment:


  • M J Mauer
    replied
    Welcome to the forum.

    Leave a comment:


  • Broccoli1
    replied
    is it really a RED stop sign?

    before welding the Voltage and Wire speed are displayed but once you start welding the Voltage and Amps display and hold for a couple seconds after the weld.

    Leave a comment:


  • Migler
    started a topic MULTIMATIC 200 - Screen Diagnostic Question

    MULTIMATIC 200 - Screen Diagnostic Question

    First Miller machine. When using the MIG and just after finishing a short weld,
    the screen on the machine shows HOLD inside a red stop sign, and also shows the voltage and amperage in the display as well. Does not stay for long. Is this a normal diagnostic or an error message of some sort?
    Can't find a source for all the diagnostics and errors that could appear on the machine.
Working...
X