Announcement

Collapse
No announcement yet.

Millermatic 211 and gas connection

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • H80N
    replied
    Originally posted by beluga View Post
    Thanks a lot !!

    I just have to find it locally ...



    No, this one is perfect.

    Thanks again !!

    Yves
    if you talk with member "snowbird"

    bet he knows who is who in your local welding suppliers

    Last edited by H80N; 01-17-2015, 01:17 PM.

    Leave a comment:


  • beluga
    replied
    Thanks a lot !!

    I just have to find it locally ...

    Originally posted by H80N View Post

    but it sounds like you may need the female at the welder end..
    No, this one is perfect.

    Thanks again !!

    Yves

    Leave a comment:


  • H80N
    replied
    Here is a link to the factory parts list..



    it looks like that fitting may be part of the gas valve on that machine..

    Leave a comment:


  • H80N
    replied
    Originally posted by beluga View Post
    Hi,

    I bought a second hand Millermatic 211 last week. Everything is in good shape, except for the gas connection ...

    At the rear end of the welder, there is a brass fitting to connect the gas hose ... But the hose fitting is broken ... I have an "NPT" standard hose connection, but it seems that the fitting on the machine is not an "NPT" thread ...

    In the "parts manual" found over Internet, there is no mention about these brass fitting ...

    I need help on this ...

    Thanks,

    Yves
    The inert gas fittings for welders are a 5/8-18, "B" Size right hand fitting

    here is a link to the regulator to welder hose with fittings...



    but it sounds like you may need the female at the welder end..

    Last edited by H80N; 01-17-2015, 12:39 PM.

    Leave a comment:


  • beluga
    started a topic Millermatic 211 and gas connection

    Millermatic 211 and gas connection

    Hi,

    I bought a second hand Millermatic 211 last week. Everything is in good shape, except for the gas connection ...

    At the rear end of the welder, there is a brass fitting to connect the gas hose ... But the hose fitting is broken ... I have an "NPT" standard hose connection, but it seems that the fitting on the machine is not an "NPT" thread ...

    In the "parts manual" found over Internet, there is no mention about these brass fitting ...

    I need help on this ...

    Thanks,

    Yves
Working...
X