Announcement

Collapse
No announcement yet.

syncro 350 lx start up

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    syncro 350 lx start up

    I serviced the cooler a couple a months ago and noticed something different during start up. Different numbers come up that I haven't seen before and as much as I use this machine they haven't changed. It seems to run fine. First 18.7 pops up in the voltage dro and 766 in the amp dro. Then they disappear and a -.5 pops up in the volt dro. Then the normal last amperage used is displayed. These numbers hasn't changed. Anyone make heads or tails of it?
    Dynasty 400 Wireless
    Coolmate 3.5
    Aerowave loaded with Sequencer and pulse
    ​Watermate 1A
    ​Coolmate 3
    XMT350 CC/CV
    D74DX Feeder double the fun
    Optima Pulse Pendant
    WC24
    30A spoolgun
    Neverlast 100 amp plasma with Hyper Duramax torch
    Avortec 280 mig
    GO CNC Poweredge CC/CV pulse and double pulse
    Harris Old school 2 stage Oxy/Ace
    Victor flow meters
    Flametech Duel flowmeters
    Just a hilljack in the woods with fancy welding equipment
    and a pet Raccoon.
    Tags: None
  • #2
    Serial number- LC561488.
    Incoming power is 230 volt single phase on a 125 amp breaker
    #4 3 conductor direct to the breaker about 25 feet from the box.
    Dynasty 400 Wireless
    Coolmate 3.5
    Aerowave loaded with Sequencer and pulse
    ​Watermate 1A
    ​Coolmate 3
    XMT350 CC/CV
    D74DX Feeder double the fun
    Optima Pulse Pendant
    WC24
    30A spoolgun
    Neverlast 100 amp plasma with Hyper Duramax torch
    Avortec 280 mig
    GO CNC Poweredge CC/CV pulse and double pulse
    Harris Old school 2 stage Oxy/Ace
    Victor flow meters
    Flametech Duel flowmeters
    Just a hilljack in the woods with fancy welding equipment
    and a pet Raccoon.

    Comment

    • #3
      With many machines that startup code is the software installed, no idea if that is the case here. Because of the decimals, I think not, If I had to guess, your Hall (lem) socket is corroded, and your going to have future problems

      Comment

      • #4
        That my explain the hard light ups and going out from time to time. Maybe my machine doesn't run correctly. I'll yank the covers off and take a look. Thanks Cruizer.
        Dynasty 400 Wireless
        Coolmate 3.5
        Aerowave loaded with Sequencer and pulse
        ​Watermate 1A
        ​Coolmate 3
        XMT350 CC/CV
        D74DX Feeder double the fun
        Optima Pulse Pendant
        WC24
        30A spoolgun
        Neverlast 100 amp plasma with Hyper Duramax torch
        Avortec 280 mig
        GO CNC Poweredge CC/CV pulse and double pulse
        Harris Old school 2 stage Oxy/Ace
        Victor flow meters
        Flametech Duel flowmeters
        Just a hilljack in the woods with fancy welding equipment
        and a pet Raccoon.

        Comment

        • #5
          A little follow up... Its headed over to the local miller repair guy. I am afraid of it.
          Dynasty 400 Wireless
          Coolmate 3.5
          Aerowave loaded with Sequencer and pulse
          ​Watermate 1A
          ​Coolmate 3
          XMT350 CC/CV
          D74DX Feeder double the fun
          Optima Pulse Pendant
          WC24
          30A spoolgun
          Neverlast 100 amp plasma with Hyper Duramax torch
          Avortec 280 mig
          GO CNC Poweredge CC/CV pulse and double pulse
          Harris Old school 2 stage Oxy/Ace
          Victor flow meters
          Flametech Duel flowmeters
          Just a hilljack in the woods with fancy welding equipment
          and a pet Raccoon.

          Comment

          Previous template Next
          Working...
          X