If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Awesome. Run another guys bobcat on a job and after a day I brought my Dynasty and powered it off the Bobcat. Ran 6010 better than his bobcat. Was welding 16" pipe for casing running 6010 root & finish 7018.
Dynasty runs both great.
I've heard its difficult to run a 6010 with certain inverter machines. Can and how well will the Dynasty run a 6010? Never tried.
Thanks for the info in advance guys, Ja
Why would you ask a question like that, you have the welder, you say you have the rods, then why not have a go on your own. Very strange question from someone who has the stuff on hand and the ability to answer his own question by simply getting on with it.
Why would you ask a question like that, you have the welder, you say you have the rods, then why not have a go on your own. Very strange question from someone who has the stuff on hand and the ability to answer his own question by simply getting on with it.
I have a 3 year old, a one year old and my wife is expecting our 3rd child. I do have spare time but lately if I can break away I'm in the marsh this time of year hunting ducks. I'll eventually get around to trying it, just wanted some insight before hand. No use wasting my time trying if it didn't run them well.
Thanks again guys! Ja
sigpic
Dynasty 200 DX
Millermatic 350P
30A Spoolgun
Lincoln Pro Mig 140
Hypertherm Powermax 30
14" Rage Evolution dry saw
40 ton press brake Evenheat Heat treat oven
1x42 / 4x48 belt grinder
I like 6010 on the dynasty better than on the AEAD-200LE.
Dynasty200DX w/coolmate1
MM210
MM Vintage
Lincoln AC225
Victor O/A, Smith AW1A
Cutmaster 81
IR 2475N7.5FP
Evolution Rage3
Jancy USA101
9" South Bend
AEAD-200LE
jmpgino, generally I'd agree, but if I had a three year old, a one year old, and a baby on the way, I think I might ask first, too, just to see if people tell me that what I want to do might in some way be hard on the expensive machine that's putting food on my family's table.
Comment