Announcement

Collapse
No announcement yet.

Miller matic 252 help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • H80N
    replied
    Originally posted by Belkofer89 View Post
    Thank you
    Pls post some pics of your projects once you get it hooked up and running...

    Leave a comment:


  • Belkofer89
    replied
    Originally posted by cruizer View Post
    Actually December 14th, 2010, 230/460/575 input, as I said. merely switch the jumper......
    Thank you

    Leave a comment:


  • Belkofer89
    replied
    Originally posted by H80N View Post
    Here is your manual.. for this serial# MA500403N
    looks like it was built during the first half of 2010

    See section 5-11 (page 19)

    http://www.millerwelds.com/om/o230693l_mil.pdf
    Thank you for everyone's help much appreciated

    Leave a comment:


  • cruizer
    replied
    Actually December 14th, 2010, 230/460/575 input, as I said. merely switch the jumper......

    Leave a comment:


  • H80N
    replied
    Originally posted by Belkofer89 View Post
    Thanks for help I looked up service code and my ser # was diffrent starts with a MA500403N can i just switch jumper and plug this way or need wire diagram
    Here is your manual.. for this serial# MA500403N
    looks like it was built during the first half of 2010

    See section 5-11 (page 19)

    http://www.millerwelds.com/om/o230693l_mil.pdf
    Last edited by H80N; 12-15-2014, 01:33 PM.

    Leave a comment:


  • Belkofer89
    replied
    thank you

    Originally posted by H80N View Post
    Here is the manual page... just match your serial number to the correct version and the info will be in the book...
    BTW.. for single phase 240vac... you will probably want a NEMA 6-50 plug..

    http://www.millerwelds.com/service/l...&submit=Search
    Thanks for help I looked up service code and my ser # was diffrent starts with a MA500403N can i just switch jumper and plug this way or need wire diagram

    Leave a comment:


  • cruizer
    replied
    Its a single phase machine, so flip the big door open , beside the wire drive, there is a panel with some copper jumpers, set the jumpers for your power, stick on a proper input plug for your receptacle and off you go.

    Leave a comment:


  • Broccoli1
    replied
    Just an FYI- the MM252 is Single Phase only so the switch is easy.

    yes it does have the option for 460v/575v but that is Single Phase as well.


    H80N posted up the link to the manuals- just change the Jumper and swap out the plug and yer ready to roll.

    Leave a comment:


  • H80N
    replied
    Info in the Manual...

    Originally posted by Belkofer89 View Post
    Hello I have a miller matic 252 its a 230 460 575 machine i got it from a guy at work who had it in a shop its set up for 460 and has a 30 a 480 v plug 3 phase I wana change plug to a 3 prong for 220 in my garage I see it has a jumper but what steps do I need to take to switch this over any help greatly appreciate of
    Here is the manual page... just match your serial number to the correct version and the info will be in the book...
    BTW.. for single phase 240vac... you will probably want a NEMA 6-50 plug..

    http://www.millerwelds.com/service/l...&submit=Search
    Last edited by H80N; 12-15-2014, 10:05 AM.

    Leave a comment:


  • Belkofer89
    started a topic Miller matic 252 help

    Miller matic 252 help

    Hello I have a miller matic 252 its a 230 460 575 machine i got it from a guy at work who had it in a shop its set up for 460 and has a 30 a 480 v plug 3 phase I wana change plug to a 3 prong for 220 in my garage I see it has a jumper but what steps do I need to take to switch this over any help greatly appreciate of
Working...
X