Announcement

Collapse
No announcement yet.

.bobcat 225 problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • .bobcat 225 problem

    Hello folks I need information from you gurus, I had to jump start my 2000 bobcat 225 it only has 610 hrs on it.The problem i see is when it started running on its own i couldn't remove jumper cables without dying , and also there was a spark at jumper to welder connection.
    Any ideas why this is happening?
    Thanks

  • #2
    Battery

    Your battery is absolutely shot.
    New battery and you're back to work IMO.

    Comment


    • #3
      I believe jump starting these things is not something these machines like. Somebody who knows more may chime in.

      Comment


      • #4
        Originally posted by Cgotto6 View Post
        I believe jump starting these things is not something these machines like. Somebody who knows more may chime in.
        Only the trailblazers are a no..no.. to jump. As for it not running after the battery is replaced be sure to check the charge circuit. Test the new battery with a voltmeter with the engine running, should be 13.5 to 14.5 volts. if its below 13 your charge circuit is the culprit and will need to be fixed, is the engine a kohler or onan?
        Kevin
        Lincoln ranger 305g x2
        Ln25
        Miller spectrum 625
        Miller 30a spoolgun
        Wc115a
        Lincoln 210mp
        F550 imt service truck

        Comment

        Working...
        X