Announcement

Collapse
No announcement yet.

Syncrowave 210 TIG

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • H80N
    replied
    Originally posted by Gingerboy View Post
    I have not one bad word or complaint about the machine. It is flat out awesome. And as far as duty cycle goes on the high end you will kill a torch before you trip the machine. Im 100% pleased with it.
    Thanks for clearing that up... and letting us know.....

    Leave a comment:


  • Gingerboy
    replied
    I have not one bad word or complaint about the machine. It is flat out awesome. And as far as duty cycle goes on the high end you will kill a torch before you trip the machine. Im 100% pleased with it.
    Attached Files

    Leave a comment:


  • elvis
    replied
    Originally posted by MMW View Post
    I can't seem to open the spec sheet. I bet that the high end has very little duty cycle. Depending what you plan on welding you may easily run out of machine especially on aluminum.

    Anyone know the duty cycle at the top end?
    These ratings are for 230vac input.

    DC TIG: 210A @ 20%, 150A @ 40%, 125A @ 60% and 95A @ 100%
    AC TIG: 184A @ 20%, 138A @ 40%, 114A @ 60% and 90A @ 100%

    It looks like it will stick weld at 150A max with a 20% duty cycle and the max input power for any process is DC TIG with 23.6amps.

    The funny thing is that while it won't go as high on the DC tig output my maxstar 150sth has a higher duty cycle with 100A @ 100%. Of course it doesn't do AC at all. But you are pretty limited with 184A max output on AC TIG.

    Leave a comment:


  • H80N
    replied
    I know that GINGERBOY had gotten one and thought he was pretty happy...

    http://www.millerwelds.com/resources...706#post314706

    but then I ran across this thread...

    http://www.millerwelds.com/resources...yncrowave-210&

    so I do not know how that story ended...
    Last edited by H80N; 12-12-2014, 08:23 AM.

    Leave a comment:


  • MMW
    replied
    I can't seem to open the spec sheet. I bet that the high end has very little duty cycle. Depending what you plan on welding you may easily run out of machine especially on aluminum.

    Anyone know the duty cycle at the top end?

    Leave a comment:


  • K.C. Brashear
    replied
    I have been anxious to hear some feed back on this machine as well

    Leave a comment:


  • vdotfarm
    started a topic Syncrowave 210 TIG

    Syncrowave 210 TIG

    Does anyone have any feedback on the Syncrowave 210 TIG.. Just wondering what it the Pro's and Con's.. Thanks
Working...
X