Announcement

Collapse
No announcement yet.

Power circuit board - Miller Legend

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cruizer
    replied
    Originally posted by rmac View Post
    Ok, so I replaced the circuit board and now have AC power and the welder will arc but when it does it pulls the engine down and won't idle up. Any suggestions of what to look for next?
    So either the throttle encoder is not plugged in, its damaged, or the toriod pickup is damaged

    Leave a comment:


  • rmac
    replied
    Power circuit board

    Ok, so I replaced the circuit board and now have AC power and the welder will arc but when it does it pulls the engine down and won't idle up. Any suggestions of what to look for next?

    Leave a comment:


  • rmac
    replied
    Thank you Cruizer!

    Leave a comment:


  • cruizer
    replied
    Tech is correct, as the power board handles all regulator functions, as well as excitation of the rotor, thus no AC auxillary. This points the problem directly to this board as being the culprit.

    Leave a comment:


  • rmac
    started a topic Power circuit board - Miller Legend

    Power circuit board - Miller Legend

    I have a miller legend 301G and it runs good but it does not have AC power to the plug-ins and will not strike an arc. My technician is thinking that it has a blown power circuit board from a close lightning strike or jump-starting the battery. He wants to start by replacing board#212705 but isn't sure if that is the bad board. Is there a better option to try or is this just a process of elimination? Any help would be appreciated.
Working...
X