Announcement

Collapse
No announcement yet.

Need new mig w/xtra long mig gun...Where find?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • aametalmaster
    replied
    Originally posted by GlenC View Post
    Sounds like this might be an option for the suitcase wire feeders. All depends on application I guess...
    Or a spool gun but i don't know the application either or how much of it...Bob

    Leave a comment:


  • GlenC
    replied
    Sounds like this might be an option for the suitcase wire feeders. All depends on application I guess...

    Leave a comment:


  • WillieB
    replied
    I have a MM252, and a Dynasty 280DX. I've tried the MIG on thin stainless, it didn't work. Might have been gas related, the manager at an Airgas Branch sold me a helium mix he said was for stainless. With the Dynasty it's effortless. If you don't need to weld aluminum there are lots of good choices in TIG.

    Leave a comment:


  • elvis
    replied
    The dynasty and mm350 are likely both out of his price range. Neither of those machines is cheap. I haven't used them but I can't imagine they could be a bad purchase. I wish I had both of those in my shop.

    Leave a comment:


  • H80N
    replied
    Originally posted by Bosco View Post
    Ongoing hunt for the thin stainless welder.

    Bummed the 212 and 252 are only rated down to 22 gauge.
    The MM350P is advertised down to 24 Ga.... has PULSE...and has a 4 roll drive system so it is more tolerant of the longer MIG guns

    http://www.millerwelds.com/pdf/spec_sheets/DC12-51.pdf

    it is an EXCELLENT machine...

    but I think a Dynasty TIG is probably your best answer..
    Last edited by H80N; 12-02-2014, 07:47 PM.

    Leave a comment:


  • Bosco
    replied
    Ongoing hunt for the thin stainless welder.

    Bummed the 212 and 252 are only rated down to 22 gauge.

    Leave a comment:


  • aametalmaster
    replied
    We have 20 footers on our Millers at work. Non Miller guns though...Bob

    Leave a comment:


  • H80N
    replied
    Originally posted by Bosco View Post
    Never mind
    MM212 & MM252 come standard with a 15ft gun according to the spec sheets...

    http://www.millerwelds.com/pdf/spec_sheets/DC12-46.pdf

    http://www.millerwelds.com/pdf/spec_sheets/DC12-49.pdf

    Leave a comment:


  • cruizer
    replied
    Its how good your drive is to push farther than a stock gun. Longer generally is NOT BETTER!

    Leave a comment:


  • Bosco
    started a topic Need new mig w/xtra long mig gun...Where find?

    Need new mig w/xtra long mig gun...Where find?

    Never mind
    Last edited by Bosco; 12-02-2014, 12:54 PM.
Working...
X