Announcement

Collapse
No announcement yet.

Tig Arc Starting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mowjunk
    replied
    The 180 SD has high frequency starts. The HF goes off after the arc has started when welding steel, but has to stay on when welding aluminum. I hope that helps you...

    Mow

    Leave a comment:


  • garcia
    replied
    ...if you wish

    to call it that. The high frequency starts the arc the minute you push on the pedal, even if it's half an inch away.
    G.

    Leave a comment:


  • DEA
    replied
    When I looked at the 180 I belive it was a high freq.start and a lift arc start options on the control panel

    Leave a comment:


  • Heimbig1
    replied
    What do you mean by automatic if you want??

    Leave a comment:


  • garcia
    replied
    If that is a Miller Syncrowave 180 SD you are talking about, it is not a scratch start. I don't know what to call it, but you push on the pedal, and it starts the arc. Beautifull, automatic if you wish.
    G.

    Leave a comment:


  • Heimbig1
    started a topic Tig Arc Starting

    Tig Arc Starting

    I am looking at a Miller SD 180 Tig Welder. I was wondering what type of arc start does this unit have. Is it a scratch start or what?

    Thanks
Working...
X