Announcement

Collapse
No announcement yet.

millermatic 211 or 212 or 252

Collapse
X
Collapse
  • Page of 5
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • #61
    Originally posted by ja baudin View Post
    If you use a push pull gun, your machine will be dedicated to aluminum only. To weld steel you will have to remove the push pull, switch drive rollers, and switch the spool of wire in the cabinet of the welder to steel. If you use a spool gun, your machine can weld both steel and aluminum. Example, pick up the spoolgun and weld aluminum or pick up the mig gun and weld steel. No switching anything. That may be a big factor for you to consider if this is your only machine and using if for both. It's called "gun on demand" capability. Ja
    It is true that it is a bit more trouble to switch to the push-pull...

    BUT in either case you will still need to change gasses and purge lines... even with "gun on demand"...

    the Alumapro push pull is only worthwhile if you are going to push a lot of aliuminum at a time... the 30A is great for small repairs.. where the 1 pound limit on spools is not a hinderence...
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment

    • #62
      Originally posted by H80N View Post
      It is true that it is a bit more trouble to switch to the push-pull...

      BUT in either case you will still need to change gasses and purge lines... even with "gun on demand"...

      the Alumapro push pull is only worthwhile if you are going to push a lot of aliuminum at a time... the 30A is great for small repairs.. where the 1 pound limit on spools is not a hinderence...
      Clarification: With gun on demand, if you have two bottles and two regulators on the back of the machine, you don't have to switch back and forth between separate gas cylinders. Just turn the one on you need. Not hating on you H8ON, just making sure the op gets a better idea on how the set up works.
      Last edited by ja baudin; 08-07-2013, 01:40 PM.
      sigpic

      Dynasty 200 DX
      Millermatic 350P
      30A Spoolgun
      Lincoln Pro Mig 140
      Hypertherm Powermax 30
      14" Rage Evolution dry saw
      40 ton press brake
      Evenheat Heat treat oven
      1x42 / 4x48 belt grinder

      Comment

      • #63
        Originally posted by ja baudin View Post
        Clarification: With gun on demand, if you have two bottles and two regulators on the back of the machine, you don't have to switch back and forth between separate gas cylinders. Just turn them off and on. Not hating on you H8ON, just making sure the op gets a better idea on how the set up works.
        No... clarity is a good thing...

        had not even thought about the two bottle rack... my MM350P has the single rack... guess I got a mental lock on that mindset..
        .

        *******************************************
        The more you know, The better you know, How little you know

        “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

        Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

        My Blue Stuff:
        Dynasty 350DX Tigrunner
        Dynasty 200DX
        Millermatic 350P w/25ft Alumapro & 30A
        Millermatic 200

        TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

        Comment

        • #64
          Originally posted by H80N View Post
          No... clarity is a good thing...

          had not even thought about the two bottle rack... my MM350P has the single rack... guess I got a mental lock on that mindset..
          Yeh, mine was the same way. I fab'd an extension of the bottle rack and the cylinders piggy back each other instead of side by side. Thanks, Ja
          sigpic

          Dynasty 200 DX
          Millermatic 350P
          30A Spoolgun
          Lincoln Pro Mig 140
          Hypertherm Powermax 30
          14" Rage Evolution dry saw
          40 ton press brake
          Evenheat Heat treat oven
          1x42 / 4x48 belt grinder

          Comment

          • #65
            Ok I was asking because there is one on EBay (xr-30 version) push pull but I think for my occasional aluminum needs the 30A will suffice

            Comment

            • #66
              millermatic 211 or 212 or 252

              You can convert it to a spool gun by buying the canister

              Comment

              Previous 1 2 3 4 5 template Next
              Working...
              X