Tweet
what is the best setup for welding ac/dc tig
on a triailblazer 301g in the field.
on a triailblazer 301g in the field.
-
-
ALLEN........a typical option for your unit would be the HF-251-D1 This is a High Frequency arc starting add on that will allow you to do Tig........Enjoy the site..............Rock.......
[email protected]ROCK -
tig
Originally posted by ROCK
ALLEN........a typical option for your unit would be the HF-251-D1 This is a High Frequency arc starting add on that will allow you to do Tig........Enjoy the site..............Rock.......
[email protected]Comment
-
allen,
You can run scratch start tig for dc with a dry rig if x-ray is not an issue. I have the 301G and faced the same dilemma of the high freq box versus running an inverter from auxillary power. Figure the cost of the HF box and accessories and compare to the Dynasty 200 series. The Dynasty will be more money, but which is the better value for your application? Only you can decide. If you are running dc and have to have the amps, consider making a torch cooling system with a sump pump and using a 250 amp or larger water cooled torch.
Good luck.Comment
Comment