Announcement

Collapse
No announcement yet.

tig

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    HAWK
    Senior Member

  • HAWK
    replied
    allen,

    You can run scratch start tig for dc with a dry rig if x-ray is not an issue. I have the 301G and faced the same dilemma of the high freq box versus running an inverter from auxillary power. Figure the cost of the HF box and accessories and compare to the Dynasty 200 series. The Dynasty will be more money, but which is the better value for your application? Only you can decide. If you are running dc and have to have the amps, consider making a torch cooling system with a sump pump and using a 250 amp or larger water cooled torch.
    Good luck.

    Leave a comment:

  • allen
    Junior Member

  • allen
    replied
    tig

    Originally posted by ROCK
    ALLEN........a typical option for your unit would be the HF-251-D1 This is a High Frequency arc starting add on that will allow you to do Tig........Enjoy the site..............Rock.......
    [email protected]

    Leave a comment:

  • ROCK
    Senior Member

  • ROCK
    replied
    ALLEN........a typical option for your unit would be the HF-251-D1 This is a High Frequency arc starting add on that will allow you to do Tig........Enjoy the site..............Rock.......
    [email protected]

    Leave a comment:

  • allen
    Junior Member

  • allen
    started a topic tig

    tig

    what is the best setup for welding ac/dc tig
    on a triailblazer 301g in the field.
Working...
X