Announcement

Collapse
No announcement yet.

3035 Spool Gun

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Moe
    replied
    I am under the impression....

    that the 3045 parts will not interchange with the 3035. If I can do this, then I will definitely try it.......

    Leave a comment:


  • ROCK
    replied
    HI MOE...........I'm not sure what the problem is........ Amperage restrictions.......No........Perhaps it is gas pressure related not enough cooling at this amperage.......Suggestion is up you gas to 30-35 psi.....Repeat processs.........Next suggestion is go to next sized tip up in diameter........As the copper tip heats up it expands on the outside but restricts on the inside...........

    Next idea would to install the 3045 front end parts onto the 3035 spool gun. These are heavier duty parts and Tip Life may be extended. Please let us know how this works out...........Rock..........
    [email protected]

    Leave a comment:


  • mowjunk
    replied
    Originally posted by Moe
    Luling..... or 1/3 of the way between NO and BR...
    30 minutes from you on 3127 in Vacherie.... Good to know. Thanks...

    Leave a comment:


  • Moe
    replied
    Luling..... or 1/3 of the way between NO and BR...

    Leave a comment:


  • mowjunk
    replied
    Moe, I can't help you with your problem, but I was wondering what part of Louisiana are you in? I'm half way between N.O. and Baton Rouge. Just curious....

    Email if it's better for you....

    Leave a comment:


  • Moe
    started a topic 3035 Spool Gun

    3035 Spool Gun

    I have been experiencing problems with contact tip desintegration immediately upon pulling the trigger on my 3035 spool gun, whenever we set the MM210 at its max setting of 7 (aluminum with .035 wire). Variations in wire speed does not help one bit. We can go all day on the #6 setting without a problem, but as soon as we go up to 7, "ZAP" there goes another tip. The mig gun on mild steel performs just fine at this setting. Still using the original tip there. But I've gone through over 10 tips in the past 2 weeks on the spool gun, mainly whenever we try it at 7.

    Are these tips limited in output power? If so, is there another tip available that can take the machine at max?
Working...
X