Announcement

Collapse
No announcement yet.

Miller Maxtron 450 cc/cv

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • MacGyver
    started a topic Miller Maxtron 450 cc/cv

    Miller Maxtron 450 cc/cv

    What's going on guys!

    I need some advice. Just bought a Miller Maxtron 450 cc/cv, and it was hooked up to 3 phase. How can I convert it to single phase?

    Cheers,

  • MacGyver
    replied
    Thanks for the help guys. Greatly appreciated.

    Leave a comment:


  • cruizer
    replied
    Originally posted by MacGyver View Post
    Thanks for the reply.

    My machine says 460/575v on the front panel.

    I need it to hook up to 240v single phase. Is this possible?

    My guess is 460v means single and 575v means three phase. I'm hoping I'm wrong.

    Well, 460 comes in singe or 3 pahse, as does 575. And neither are going to help your situation.

    you can get a step up transformer, somewhat costly. but it will work

    Leave a comment:


  • Broccoli1
    replied
    Originally posted by MacGyver View Post
    Thanks for the reply.

    My machine says 460/575v on the front panel.

    I need it to hook up to 240v single phase. Is this possible?

    My guess is 460v means single and 575v means three phase. I'm hoping I'm wrong.
    Only if you have some way to step up the Voltage

    There is 460v Single phase as well as 575 single phase but that doesn't help you with trying to run it off of 240v Single phase since the machine you have was designed for 460v/575v Single or 3=Phase

    http://www.millerwelds.com/om/o2206d_mil.pdf

    Leave a comment:


  • MacGyver
    replied
    Thanks for the reply.

    My machine says 460/575v on the front panel.

    I need it to hook up to 240v single phase. Is this possible?

    My guess is 460v means single and 575v means three phase. I'm hoping I'm wrong.

    Leave a comment:


  • blue_tech
    replied
    You can connect those to single phase by connecting your incoming power to the "L1" and "L2" at the TE2 Terminal Block, where you connect your incoming power. Keep in mind the higher amount of primary current draw on single phase power.

    Input Voltage / Input Amps at Rated Output / Recom Fuse Size / Conductor Size

    230V - 89.6 A - 125 A - 4 ga
    460V - 47.2 A - 60 A - 8 ga

    Leave a comment:


  • MacGyver
    replied
    I actually have 2 Miller Maxtron 450 cc/cv welders. Both are 3 Phase. Here are the serial numbers from both units.

    Serial No.

    Welder #1: KE640235
    Welder #2: KD512491

    Leave a comment:


  • cruizer
    replied
    What is its serial#

    Leave a comment:

Working...
X